5.1.4 Preset tours
EPTZ 100 provides 7 different preset tour modes. All tours are defined in OSD setup menu.
1. | PATROL TOUR: | Preset tour with up to 16 selected presets. |
2. | ALL PRESET TOUR: | Preset tour with all available presets. |
3. | GROUP 1 TOUR: | Preset tour with presets 1~4 |
4. | GROUP 2 TOUR: | Preset tour with presets 1~4 |
5. | GROUP 3 TOUR: | Preset tour with presets 1~4 |
6. | GROUP 4 TOUR: | Preset tour with presets 1~4 |
7. | TOUR SCAN: | Preset tour with defined preset GROUPS |
TOUR > [tour number 1...7] > ENTER
Tour numbers: | [1] PATROL TOUR | |
| [2] | ALL PRESET TOUR |
| [3] | GROUP 1 TOUR |
| [4] | GROUP 2 TOUR |
| [5] | GROUP 3 TOUR |
| [6] | GROUP 4 TOUR |
| [7] | TOUR SCAN |
Camera:0001 Run Tour:__[1-16]
Alternative for ALL PRESET TOUR:
POSIITIION > 99 > ENTER
5.1.5 Pattern tours
EPTZ 100 provides 4 programmed pattern tours with up to 10 minutes duration each. The pattern tours are started with the TOUR key.
TOUR > [tour number 17...20] > ENTER
Tour numbers: | [17] | Pattern 1 |
| [18] | Pattern 2 |
| [19] | Pattern 3 |
| [20] | Pattern 4 |
Camera:0001 Run
5.1.6 Remote switching of EPTZ 100 output relay
The EKB 500 keyboard provides the option to switch the output relay of EPTZ 100 on / off.
Switch relay ON: F4 > [[1]] > ENTER
Alternative:
POSIITIION > 82 > ENTER
Switch relay OFF: CLR + F4 > [[1]] > ENTER
Alternative:
POSIITIION > 81 > ENTER
Switch Alarm Out: _ [ 1-8] ON
Switch Alarm Out: _ [ 1-8] OFF
41 | EPTZ100_ma_en_rev03.doc |