EverFocus EPTZ 100 manual Patrol Tour, ALL Preset Tour, Group 1 Tour, Group 2 Tour, Group 3 Tour

Page 43

5.2.3 Autopan

The speed for autopan function is programmed in the OSD menu; the entered value for speed in EKB 500 will be ignored at start of autopan.

Activate A-B autopan (pan/tilt between 2 points)

A..PAN (Pelco-P only)

Alternative:

POSIITIION > 99 > ENTER

5.2.4 Preset tours

EPTZ 100 provides 7 different preset tour modes. All tours are defined in the OSD setup menu.

PATROL TOUR:	Preset tour with up to 16 selected presets.
ALL PRESET TOUR:	Preset tour with all available presets.
GROUP 1 TOUR:	Preset tour with presets 1~4
GROUP 2 TOUR:	Preset tour with presets 1~4
GROUP 3 TOUR:	Preset tour with presets 1~4
GROUP 4 TOUR:	Preset tour with presets 1~4
TOUR SCAN:	Preset tour with defined preset GROUPS

POSIITIION > [number] > ENTER

Tour numbers:	[68] TOUR SCAN
	[69]	PATROL TOUR
	[70 or 98] ALL PRESET TOUR
	[71]	GROUP 1 TOUR
	[72]	GROUP 2 TOUR
	[73]	GROUP 3 TOUR
	[74]	GROUP 4 TOUR

Camera:0001 goto Position:__[1-192]

5.2.5 Pattern tours

EPTZ 100 provides 4 programmed pattern tours with up to 10 minutes duration each. The pattern tours are started with the POSIITIION key.

POSIITIION > [number] > ENTER

Numbers:	[75]	Pattern 1
	[76]	Pattern 2
	[77]	Pattern 3
	[78]	Pattern 4

Camera:0001 goto Position:__[1-192]

43	EPTZ100_ma_en_rev03.doc

Image 43

Contents Eptz Weee Safety WarningsTable of Contents Device Setting Camera Delivery Scope FeaturesOptional Accessories IntroductionCommunication SpecificationsAlarm CameraPhysical / environment PowerDimensions with ceiling mount adapter DimensionsDimensions with recessed ceiling mount adapter Dimensions wall bracket Eptz 100 WLM Dimension Eptz 100 with wall mount bracket Eptz 100 WLMDimension ceiling pendant bracket Eptz 100 CPM Dimension Eptz 100 with ceiling pendant bracket Eptz 100 CPMMechanical InstallationCeiling mount Recessed ceiling mount Wall mount Ceiling pendant mount Electrical PowerVideo 3 RS-485 3.1 RS-485 installation with EKB 500 keyboard 3.2 RS-485 installation with EverFocus DVR Alarm Baud rate and Protocol Communication Settings2 RS-485 ID address EPTZ100maenrev03.doc 3 RS-485 bus termination OSD Menu SetupOperation in Setup Menu Initial StartOSD Structure Part Menu StructureControl System info Main menuDisplay White BAL Advanced setting camera setupMain Setup CAM Title CameraAuto BacklightMotion DET FocusExposure Brightness Zoom POS InitLens Init ENDSpecial User PresetUart Mode RET PKT Enable ResetScan GROUP2 TiltLevel GROUP1 SpeedGROUP1 Tour ScanPatrol Delete PatternRecord PreviewControl MASK1~4 Privacy MaskInitialize General key description Operation with EKB 500 KeyboardOperation outline EKB 500 Operation with Everfocus Protocol EVF-2Preset positions Eptz 100 setup menuAutopan Pattern tours Preset toursRemote switching of Eptz 100 output relay Switch Alarm Out 1-8 on Switch Alarm Out 1-8 OFFEKB 500 Operation with PELCO-D/P Protocol Group 2 Tour ALL Preset TourPatrol Tour Group 1 TourSwitch relay OFF CLR + F4 1 Enter Switch Alarm Out Switch relay on F4 1 EnterCOM Port Setting RS-485 Interface Setting Appendix a Basic Settings AT EKB 500 KeyboardDevice Setting Camera System I/O Control menu Appendix B Basic Settings AT Everfocus DVREDR / Edvr / Edsr Series Except EDSR100, EDSR100H Ecor / Paragon SeriesGeneral Malfunction Recovering Communication Settings of Camera ModuleChina Subsidiary Japan Subsidiary Head Office USA Subsidiary European Subsidiary