EverFocus EPTZ 100 manual Camera, Advanced setting camera setup, Main Setup CAM Title, White BAL

4.1.6Camera

This menu provides the camera video settings.

CAMERA

ZOOM SPEED

ADVANCED SETTING

RESCUE MODE

BAUD RATE

PARITY

RETURN

Zoom speed setup in 8 possible levels:

Level 1: slowest to Level 8: fastest

Opens submenu for camera features (following chapter)

Mode for recovering serial communication between speed dome and camera module. This mode is not needed for normal setup. Keep setting OFF.

For details consult APPENDIX C: Troubleshooting

Baudrate display for RESCUE MODE. This parameter is not needed for normal setup.

For details consult APPENDIX C: Troubleshooting

Display of parity setting for RESCUE MODE. This parameter is not needed for normal setup.

For details consult APPENDIX C: Troubleshooting

Returns to main menu

4.1.6.1 Advanced setting (camera setup)

NOTE: This menu and its submenus require an operation different from the other EPTZ 100 OSD menus:

Switch between the settings:	JOYSTIICK
Switch to submenu / enter:	IIRIIS +
Leave the menu:	Menu item "EXIT", confirm with IIRIIS +

MAIN SETUP
CAM TITLE	Alternative camera title display option. Please leave this setting OFF and use
	"CAMERA NAME" in DISPLAY menu for editing / displaying camera title
WHITE BAL	White Balance mode:
	ATW Auto-tracking white balance. ATW continuously checks the whole image,
	weights all colours in the picture and updates the white level and colour
	temperature which is suitable for constantly changing scene.
	2 options are available for ATW indoor and outdoor. Indoor mode tends
	to be more blue and outdoor mode adds more red to the whole image.
	AWC Auto white balance. Camera will make colour calibration of the picture
	for once and keep the colour temperature until the next command is
	given. To refresh the colour, a manual trigger needs to be done to the
	AWC when shown on the display.

Manual Manual adjustment of colour preference. With manual setting, the colour temperature can be fixed which can be suitable for indoor and static environment.

If the lighting is Tungsten or similar (more natural), try to either add

27 EPTZ100_ma_en_rev03.doc