EverFocus EPTZ 100 manual Privacy Mask, MASK1~4

4.1.9 Privacy Mask

EPTZ 100 allows for masking 4 different areas to protect private or confidential zones in the field of view.

MASK1~4	OFF/ON shows the status of the privacy zone:
	ON: privacy zone masking active
	OFF: privacy zone off
	RIGHT enters the submenu to mask setup
	POSITION Definition of size and position of the privacy zone:
	Step 1: the corner in the screen marks the upper left border of the privacy
	zone:
		IRIS OPEN:NEXT STEP

Move the camera to the desired position and press IRIS OPEN (+) to proceed.

Step 2: next screen shows the lower right border of the privacy zone:

		IRIS CLOSE TO EXIT
	Move the camera to the desired position and press IRIS CLOSE (-) to
	proceed.
	The defined mask will appear on the screen.
ENABLE	ON:	privacy zone masking active
	OFF:	privacy zone off
RETURN	Returns to privacy mask menu.
RETURN	Returns to MAIN menu.

NOTE: If privacy masking is active, the pan / tilt speed of the dome is reduced for ensuring correct processing of privacy masks.

36 EPTZ100_ma_en_rev03.doc