EverFocus EPTZ 100 Zoom POS Init, Lens Init, End, Exposure Brightness, Iris, Manual, Shutter, Agc

	ZOOM POS INIT	Defines a zoom position after powering up the camera,
		range is x1 ~ x10
	LENS INIT	Reset of the autofocus lens in case of malfunction
	END	Return to CAMERA ADVANCED SETTING page
EXPOSURE	BRIGHTNESS	Image brightness setting, range 1~100
	IRIS	Mode of the lens iris:
		AUTO:	automatic iris mode
		MANUAL:	manual iris operation

SHUTTER	Electronic exposure control
	ESC: Electronic auto shutter, the shutter speed is
	automatically adapted to light conditions
	NOTE: This mode item is only available for setup
	if IRIS mode is set to "MANUAL"
	MANUAL: Manual setup of shutter speed
	A.FLK: Flickerless mode. Useful in sceneries with light
	sources powered with a frequency different
	from the camera
AGC	Automatic Gain Control, gains video signal under low light
	conditions.
	HIGH: AGC ON, high gain
	NORMAL: AGC ON, normal gain
	OFF: AGC off (SSNR and SENS-UP are not available in
	this mode)
SSNR	Signal noise reduction. This feature improves the signal-
	noise ratio under low-light conditions.
	OFF: no noise reduction
	LOW, MID, HIGH: level of noise reduction
	NOTE: this feature requires setting AGC: NORMAL or
	HIGH
SENS-UP	The SENS-UP function increases the light sensitivity by
	interpolation of several images.
	AUTO: SENS-UP function active. Enter the submenu to
	enter the number of maximum interpolated
	pictures (2 ~ 128)
	NOTE: Please consider that a higher value
	creates brighter pictures, but due to the
	longer calculation time moving objects
	may appear distorted in the picture.
	(effect similar to longer exposure time at
	photo cameras)
	OFF: no SENS-UP function
	NOTE: this feature requires setting AGC: NORMAL or
	HIGH
END	Return to CAMERA ADVANCED SETTING page

29 EPTZ100_ma_en_rev03.doc