3.1.2 Recessed ceiling mount
Recessed ceiling mount is possible at open ceilings. A metal ring has to be mounted at ceiling side.
1) Cut a 115mm / 4.6" hole into the ceiling.
2)Drill 3 screw holes for mounting in the ceiling Use the metal ring as template for drilling holes.
1
2
3)Plug the connector board to the dome module and latch it by turning clockwise.
4)Remove the clear dome cover and click the plastic cover ring at the dome cover with some pressure. Mount the dome cover with ring to the camera module.
3
4 | 5 |
5)Position the metal ring at top side of ceiling and mount the prepared speed dome module to the metal ring with 3 tapping screws.
12 | EPTZ100_ma_en_rev03.doc |