Nikon 5000ED Insert an Adapter, Choose an adapter, Check the status LED, Removing Adapters

Page 34

Step 2—Insert an Adapter

The adapters provided with the SUPER COOLSCAN 5000 ED and COOLSCAN V ED can be used to scan 35-mm ﬁlm mounted as individual slides or in strips of two to six frames.

1 Choose an adapter

To scan							Choose

35-mm ﬁlm in strips of two to six frames			SA-21 strip ﬁlm adapter

35-mm slides (one slide at a time)	MA-21 slide mount adapter
Check the status LED
2 Make sure that the status LED is glowing steadily.	Do
2 Make sure that the status LED is glowing steadily.	Do
not insert adapters or ﬁlm while the status LED is blink-
not insert adapters or ﬁlm while the status LED is blink-
ing.
ing.

Insert the adapter
3 Slide the adapter into the adapter slot. When the adapter is fully inserted, the status LED
will blink for about 30 seconds (5000 ED) or 20 seconds (COOLSCAN V ED).
SA-21 strip	MA-21 slide
ﬁlm adapter	mount adapter

Removing Adapters

Before removing adapters from the scanner, eject the ﬁlm or slide ( 38) and check that the status LED has stopped blinking. Remove adapters as shown.

SA-21 strip ﬁlm	MA-21 slide mount
adapter	adapter

Optional Holders and Adapters

Optional adapters and ﬁlm holders are available for a variety of ﬁlm, including single-frame strips of 35-

mmﬁlm, APS (IX-240) ﬁlm cartridges, glass microscope slides, and rolls of developed 35-mm ﬁlm up to forty frames in length (5000 ED only). See “Optional Holders and Adapters” ( 48).

25

Image 34

Contents Manuel de Iutilisateur Manual del Usuario 35mm/APSIX240 Film ScannerSetup Product Documentation On CDFor Your Safety At voltages of AC 125 V or lessDo not handle with wet hands Iii Page Table of Contents Scanning Short, Long, or Damaged Film Before You Begin Illustrations Principal FeaturesIntroduction TerminologyStatus LED Scanner status is indicated as follows Parts of the ScannerScanner status Rear View Precautions for Use Check the status LEDPage Setup Setup and Scanning Guide Imaging applica Tion e.g., AdobeChoose an adapter 25 and insert ﬁlm Windows XP/Windows 2000 Professional Installing Nikon ScanWindows Earlier Versions of Nikon ScanClick Install If the Language Selection Dialog Is Not DisplayedDevice Registration Windows 2000 Professional Select LS- 40/50/5000 and click NextWindows 2000 Professional Windows XP, Windows Me, Windows 98 SE10Click Windows Settings File ExtensionsWindows 98 SE Viewing the Easy Scanning Guide Windows USB MacintoshMac OS Click Easy Install Authenticate Mac OS X OnlyClick Install to begin installation Selecting a Plug-ins Folder Mac OSClick Macintosh 10Select Apple RGBViewing the Easy Scanning Guide Macintosh Choose a Location Installing the ScannerInstalling the Scanner Choose a ﬂat, stable location close to the computerConnect the Power Cable Make sure the power switch is in the off position Connect the USB cable Connecting the USB Cable Connecting the Scanner USBBasic Scanning Windows 2000 Professional Turn the Scanner OnIf the Status LED Flickers Check the status LED Insert an AdapterChoose an adapter Removing AdaptersDescription Open the Scan WindowApplication Application PlatformNikon Scan Is Unable to Find Any Active Devices Scan window will openTemporary Storage Windows Only SA-21 strip ﬁlm adapter Insert FilmInsert ﬁlm as shown MA-21 slide mount adapterInserting Film in the SA-21 Preview/Thumbnail When Film Is InsertedCaring for Film SA-21 Lock MechanismChoose a Film Type and Color Model Use with Choose the ﬁlm typeOption OptionDescriptionPreview MA-21 Slide-Mount AdapterRotating and Flipping Images Preview buttonButtonFunction Select a Crop Scan Image Enhancer Choosing an Output Size and ResolutionScan Bit Depth Easy Scanning GuideClick the Scan button Scan and SaveBatch Scans Typical Save As dialogs Select the save commandPrinting Images Ejecting Film from the SA-21 Eject and ExitSA-21 MA-21Nikon Scan Scan Window Tool ChestScan Window Parts of the scan window are identiﬁed belowTools button Control AreaPrefs button Preview button Information PanelPreview and Scan Buttons Scan buttonPreview Area Thumbnail Drawer TabProgress Window Best choice in most situations Tool ChestAccording to how image will be used SionsCurves Digital ICE Scan Bit DepthKodachrome Film Technical Notes Optional Holders and Adapters AdapterSpeciﬁcations Open the holder Holding the FH-3 with the Nikon logo FH-3 Film HolderUppermost, unlatch the holder snaps Open the holder Inserting the Holder Caring for the Scanner MaintenanceWhen the Scanner Is Not in Use ServicingTransport Transporting the ScannerOpening the Roller Frame Caring for the SA-21 Strip-Film AdapterContinuing Jams Caring for the MA-21 Slide-Mount Adapter Rollers Toothed WheelTroubleshooting ProblemPossible cause Nikon Scan Reference ManualProblem Solution Scanning Short, Long, or Damaged FilmMm or more 30 mm Or less Open the front panel Press the release button and open Film Feed Errors SA-21Front panel Adapter cover Toothed wheel Roller frame Frame lock lever Export Settings Uninstalling Nikon ScanSelect Nikon Scan 4 Uninstall Click Accept License agreement will be displayed Select Uninstall Click Continue…Custom Install Macintosh Only Select Custom InstallPage If the Scanner Is Not Listed Speciﬁcations Slides Optical resolution35-mm ﬁlm strips Scan rangeSupplied Adapters Symbols Index6MRA0830