Film Feed Errors (SA-21)
If film jams in the
1 Release the adapter lock mechanism
If the computer displays an error message, click OK to release the adapter lock mecha- nism.
2 Remove the
Exercise caution to avoid damaging any film that may be protruding from the rear of the adapter.
Place the |
|
3 To prevent damage to the adapter, work with the | |
Open the front panel |
|
4 Press the release button and open the | Release button |
front panel. |
|
| Front |
| panel |
The SA-21 Lock Mechanism
Attempting to remove the
Remove Dust from Film
Dust is a common cause of film feed errors. To prevent jams, use a blower to remove dust and lint from film before scanning.
Continuing Errors
If an error is displayed after the film is ejected, it may be necessary to clean the
Optional Adapters
For information on removing jammed film from optional adapters, see the documentation provided with the adapter.
60