Toshiba IK-WB21A manual Connection Configuration, Set the IP address of the personal computer

Page 14

and Operation

Introduction

Viewing ・ Listening

Recording

Set up

Others

Connecting the Camera and Personal Computer by Network (Cont.)

Connection Configuration

Two configurations are available for connection of network cameras. ・Crossover connection

・Connection via a hub, switch, or router

●Using a crossover cable to establish a connection (example)

Network camera

Personal computer

IP address

IP address

192.168.0.30

192.168.0.50

LAN cable (crossover)

Crossover cable is not provided with the product.

●Establishing a connection via a hub (example)

Network camera

IP address�

 

192.168.0.30

Internet

 

 

Personal computer

 

Hub, switch, �

 

or router

IP address� 192.168.0.50

LAN cable（straight through）� LAN cable（straight through）�

LAN cable (straight through) and Hub is not provided with the product.

NOTE

●You do not need to assign an IP address to a hub.

●The IP address of your camera after purchasing from the store is automatically set to 192.168.0.30 in case DHCP is not used. Set the IP address of your personal computer in the same subnet. (The network segment must be the same segment when directly connecting using a cross cable or connecting through the hub)

When connecting more than one camera, connect each camera using IP Address 192.168.0.30 and change the IP addresses of the second and subsequent cameras to other IP addresses, such as 192.168.0.31.

●You can also use the LAN port of your broadband router.

However, when using the broadband router, if the DHCP server function is set to "ON", turn on the power after connecting the camera with the router. The camera gets the IP address from the router's DHCP server and it may not be 192.168.0.30.

For more information, read your user's guide for broadband router.

It is also recommended to set the computer's IP address from the router's DHCP server.

For more information, read your computer's user's guide.

Connecting Camera and Personal Computer

1 Connect LAN cable and turn the power on.

Connect the LAN cable (straight cable) connected to the camera to the hub. Or, connect the camera to a personal computer with the power turned on using the LAN cable (cross cable).

･Connect DC 12V to the power terminal.

2 Set the IP address of the personal computer.

･Set the IP address which you are not using other than 192.168.0.30 (camera's IP address).

･Set the IP address to 192.168.0.50 (and subnet mask to 255.255.255.0) as an example.

･For details on the procedure, refer to the user's guide of the personal computer.

3 Test the camera connection using ping.

･Start a command prompt. Type "ping 192.168.0.30" and press "Enter" key.

･If the "Reply from..." message appears, the connection is correctly established.

4 Search the camera by "Camera Finder" explained on page 28 and view a camera image.

1.Start "Camera Finder" and click the "Search" button.

･Confirm that the camera name "nwcam 21" is displayed in the camera list.

2.Click "nwcam 21", to select.

･Check that the camera name, IP address and HTTP port No. are displayed in the "Network Camera Log-in" field.

3.Click the Administrator button or the User button.

･Clicking the Administrator button will display a screen for inputting the user name and password. Input the administrator log-in ID and password. (See "Administrator Log-in" on page 30)

4.A camera image screen of the network camera will appear.

NOTE

●To view images without using "Camera Finder," launch the Internet browser, enter URL http://192.168.0.30/ in the address box and press "ENTER."

●It takes about 30 seconds to activate the camera.

●If a port number other than "80" is set, designate the port number by suffixing it after ":" as in http://192.168.0.30:88/.

Introduction

and

Viewing

Operation

Listening

 

・

Recording

Set up

Others

26

27

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Model IK-WB21A Fccus Information Tested To Comply With FCC Standards IntroductionTerms and Trademarks For Home or Office USETable of Contents Recording Images on FTP Server ･ Recording by alarmSetting ･ Scheduled RecordingImportant Safeguards Important Safeguards AC adaptor Precautions for UseSpecifications SD Memory CardFeatures of the Camera Overview of the Network CameraRemove the terminal cover Installing the CameraNames of Camera Parts Connect the AC adapter cable and LAN cable to the cameraWhen installing on ceiling AC adapter cable LAN cableRemoving the camera from the ceiling attachment Install the cover for mounting on a ceilingMount the camera on the ceiling attachment Connecting the Power Cord Turning on the PowerItems needed for network camera monitoring system IP AddressSet the IP address of the personal computer Connection ConfigurationTest the camera connection using ping Click the camera you want to login from the list of cameras Click the Administrator button or the User buttonAdministrator Log-in and User Log-in OperationSetup Screen Administrator Log-in Screen and User Log-in ScreenViewing images Browser setting when proxy server is usedViewing and listening Log-in the cameraMoving the screen center AudioCamera image screen Number and Item DescriptionPreset button. The preset control panel will ControllerPresetting of Camera Position by Administrator Assign the camera position in the Preset list Selecting a PresetConfiguring a Preset Preset Position Settings Setup Preset ItemsPreset Name Settings Playing Recorded Alarm Images Playing Recorded Normal ImagesClick Audio in the sub menu Click Camera Settings on the Admin. menu. ThenAudio Out Camera Image screen and set to displayAbout Recording Images Record setting Insert SD memory card to the cameraClick Camera Settings on the Admin. Menu Click Recording in the sub menuClick the Save button under the items Configure each setting itemsClick Camera Settings in the Admin. Menu Deleting Record FileRecording Images on FTP Server Record settingClick the Save button to save settings Click FTP Recording in the sub menuScheduled Recording Transfer Image SizeFTP Server Usage Displayed if Scheduled Recording is chosen as an FTPEX/MD SD card back up Images Jpeg files can be recorded in a personal computer ･ The setup screen for Jpeg Local Saving will appearFile Transfer Order Scheduled Recording ･ Jpeg file will appear on the personal computerClick an item in the sub menu desired to set Setting･ The setup screen for Wave Local Saving will appear Sound can be recorded in a personal computer wav fileCamera/Basic Settings Click 1. General in the sub menuOperating color Overview Characteristics Remarks CameraTemperature AutomaticallyHigh LOWMiddle Setup 3 Item setting Camera/Alarm SettingsClick Camera Settings on the Administrator Setup MenuOFF Camera/E-mail SettingsClick 5. E-mail in the sub menu Operation Introduction Camera/Audio Settings Click 6. Audio in the sub menuPAN/TILT Basic Settings Click PAN/TILT Settings in the Admin. Menu･ a setup screen of PAN/TILT Preset Settings will appear PAN/TILT Preset SettingsClick 2. Preset in the sub menu PAN/TILT Operation Range Click PAN/TILT Settings in the Administrator Setup menuPAN/TILT Auto Patrol Click 3. Auto Patrol in the sub menu･ The sub menu for Network Settings will appear Network Basic SettingsClick Network Settings in the Admin. Menu ･ a setup screen of Network Basic Settings will appearClick 2. Ddns in the sub menu Network/DDNS SettingsNetwork / FTP Server Settings Click 3. FTP Server in the sub menuClick 1. Adding and Removing Cameras in the sub menu Click Multi Screen Display in the Admin. Menu･ The sub menu for multi screen display setting will appear Administrator log-in name and password can be set Click Admin. Function in the Admin. MenuClick 1. Changing ID/Password in the sub menu ･ The sub menu for administrator functions will appearClick 2. User Operation Restriction in the sub menu Click Admin. Functions in the Admin. Menu･ The sub menu for administrator function will appear Click 3. Date and Time in the sub menuSelect the file for the latest firmware saved in First step Click 4. FW Update in the sub menuClick the Browse... button Click the Upload button in the screen for StepReset all set values to factory defaults Click Configuration Information in the sub menuSelect a saved setup file Network Camera RebootingLooking up the log or setup items Alarm TerminalsClick Log Management in the Admin. Menu Click 1. Browse and Delete in the sub menuExample Circuit Connection Specifications of Alarm SignalsGlossary Index Jpeg LANFTP LiveLog Display Output message Message109 Before Calling Service Personnel Before Calling Service Personnel... 114 116 117 Specifications OthersAppearance Diagram Installed on desk Unit mm inches Installed on ceilingPreamble GNU General Public LicenseVersion 2, June 125 No Warranty END of Terms and ConditionsToshiba America Information SYSTEMS. INC
Top Page Image Contents