Toshiba IK-WB21A Network Basic Settings, Click Network Settings in the Admin. Menu, Dhcp ON/OFF

Page 44

and Operation

Introduction

Viewing Listening

Recording

Set up

Others

Network Basic Settings

An IP address and other items for connection to the network are set.

1 Click "Network Settings" in the Admin. Menu.

The sub menu for Network Settings will appear.

2 Click "1. General" in the sub menu.

A setup screen of "Network - Basic Settings" will appear.

3 Configure each setting items.

Click the Save button to save settings.

The settings will not be reflected unless the Save button is clicked.

Camera name

Enter maximum 18 alphanumeric characters as a name for the camera. You cannot use these characters: ' "

DHCP ON/OFF

1)Set ON or OFF for DHCP.

ON: An IP address is automatically obtained.

OFF: Sets an IP address by self.

2)When "OFF" is chosen, enter the "IP address", "Subnet Mask", "Default Gateway", "Primary DNS" and "Secondary DNS."

Auto Camera Detection

Set ON or OFF for Auto Camera Detection.

The camera is equipped with a function to automatically detect and store other cameras (only cameras provided with RNCP) in the same network. This function is useful in the multi-view screen function. "ON" is recommended if there are other network cameras in the same net- work.

HTTP Port Number

Enter an HTTP port number. Normally, "80" is default.

Bandwidth Control

Set ON or OFF for bandwidth control.

OFF: The network Camera will display images maximum frame rate al- lowed by the network.

ON: The Network Camera displays images up to the set bandwidth using a lower bandwidth results in higher frame rates.

NOTE

Ask your system administrator for Subnet Mask information.

It is not necessary to enter Default Gateway if it is not used. Ask your Network Administrator for Default Gateway information.

When reconnecting Network Camera after changing the IP address and/or HTTP port number, be sure to check IP address and the HTTP port number in the browser are correct.

Clicking the Save button displays the confirmation message "This sill save setting changes and reboot the camera. Do you want to continue? (Please type in the address in the browser after rebooting the camera.)" Click "Yes" save settings.

You cannot use these characters: ' "

Introduction

and

Viewing

Operation

Listening

 

Recording

Set up

Others

86

87

Image 44
Contents Model IK-WB21A Introduction Terms and TrademarksFccus Information Tested To Comply With FCC Standards For Home or Office USETable of Contents ・ Recording by alarm SettingRecording Images on FTP Server ・ Scheduled RecordingImportant Safeguards Important Safeguards Precautions for Use SpecificationsAC adaptor SD Memory CardFeatures of the Camera Overview of the Network CameraInstalling the Camera Names of Camera PartsRemove the terminal cover Connect the AC adapter cable and LAN cable to the cameraWhen installing on ceiling AC adapter cable LAN cableRemoving the camera from the ceiling attachment Install the cover for mounting on a ceilingMount the camera on the ceiling attachment Connecting the Power Cord Turning on the PowerItems needed for network camera monitoring system IP AddressSet the IP address of the personal computer Connection ConfigurationTest the camera connection using ping Click the camera you want to login from the list of cameras Click the Administrator button or the User buttonAdministrator Log-in and User Log-in OperationSetup Screen Administrator Log-in Screen and User Log-in ScreenBrowser setting when proxy server is used Viewing and listeningViewing images Log-in the cameraAudio Camera image screenMoving the screen center Number and Item DescriptionPreset button. The preset control panel will ControllerPresetting of Camera Position by Administrator Assign the camera position in the Preset list Selecting a PresetConfiguring a Preset Preset Position Settings Setup Preset ItemsPreset Name Settings Playing Recorded Alarm Images Playing Recorded Normal ImagesClick Camera Settings on the Admin. menu. Then Audio OutClick Audio in the sub menu Camera Image screen and set to displayRecord setting Insert SD memory card to the camera Click Camera Settings on the Admin. MenuAbout Recording Images Click Recording in the sub menuConfigure each setting items Click Camera Settings in the Admin. MenuClick the Save button under the items Deleting Record FileRecord setting Click the Save button to save settingsRecording Images on FTP Server Click FTP Recording in the sub menuTransfer Image Size FTP Server UsageScheduled Recording Displayed if Scheduled Recording is chosen as an FTPEX/MD SD card back up ・ The setup screen for Jpeg Local Saving will appear File Transfer Order Scheduled RecordingImages Jpeg files can be recorded in a personal computer ・ Jpeg file will appear on the personal computerSetting ・ The setup screen for Wave Local Saving will appearClick an item in the sub menu desired to set Sound can be recorded in a personal computer wav fileCamera/Basic Settings Click 1. General in the sub menuOverview Characteristics Remarks Camera TemperatureOperating color AutomaticallyHigh LOWMiddle Camera/Alarm Settings Click Camera Settings on the Administrator SetupSetup 3 Item setting MenuOFF Camera/E-mail SettingsClick 5. E-mail in the sub menu Operation Introduction Camera/Audio Settings Click 6. Audio in the sub menuPAN/TILT Basic Settings Click PAN/TILT Settings in the Admin. Menu・ a setup screen of PAN/TILT Preset Settings will appear PAN/TILT Preset SettingsClick 2. Preset in the sub menu Click PAN/TILT Settings in the Administrator Setup menu PAN/TILT Auto PatrolPAN/TILT Operation Range Click 3. Auto Patrol in the sub menuNetwork Basic Settings Click Network Settings in the Admin. Menu・ The sub menu for Network Settings will appear ・ a setup screen of Network Basic Settings will appearNetwork/DDNS Settings Network / FTP Server SettingsClick 2. Ddns in the sub menu Click 3. FTP Server in the sub menuClick 1. Adding and Removing Cameras in the sub menu Click Multi Screen Display in the Admin. Menu・ The sub menu for multi screen display setting will appear Click Admin. Function in the Admin. Menu Click 1. Changing ID/Password in the sub menuAdministrator log-in name and password can be set ・ The sub menu for administrator functions will appearClick Admin. Functions in the Admin. Menu ・ The sub menu for administrator function will appearClick 2. User Operation Restriction in the sub menu Click 3. Date and Time in the sub menuClick 4. FW Update in the sub menu Click the Browse... buttonSelect the file for the latest firmware saved in First step Click the Upload button in the screen for StepClick Configuration Information in the sub menu Select a saved setup fileReset all set values to factory defaults Network Camera RebootingAlarm Terminals Click Log Management in the Admin. MenuLooking up the log or setup items Click 1. Browse and Delete in the sub menuExample Circuit Connection Specifications of Alarm SignalsGlossary Index LAN FTPJpeg LiveLog Display Output message Message109 Before Calling Service Personnel Before Calling Service Personnel... 114 116 117 Specifications OthersAppearance Diagram Installed on desk Unit mm inches Installed on ceilingPreamble GNU General Public LicenseVersion 2, June 125 No Warranty END of Terms and ConditionsToshiba America Information SYSTEMS. INC