Toshiba IK-WB21A manual Items needed for network camera monitoring system, IP Address

Page 13

and Operation

Introduction

Viewing ・ Listening

Recording

Set up

Others

Setting Network Camera Environment

Items needed for network camera monitoring system

●Administrator's personal computer

The personal computer that is given all authorities for setting, operating, monitoring and other functions with the network camera is called the "administrator's personal computer" in this manual.

* The terminal equipment only for viewing monitored images is called the "user's personal computer" in this manual. More than one user's personal computer can view monitored images of one network camera.

Recommended personal computer operating conditions

･Windows2000 or XP as OS

･Internet Explorer Ver 6.0 or later

･CPU: IntelPentiumIII 800MHz or higher

･Memory: 256MB or more

●Network camera (TOSHIBA network camera IK-WB21A)

･Please purchase the required and appropriate number of cameras corresponding to the desired camera installation locations.

●Connection equipment such as a hub and router suiting the network system environment and LAN cable

･The LAN cable type differs depending on the connection method. For further information, see "Connection Configuration" on page 26.

●Camera search application "Camera Finder"

･Install this application from the CD-ROM supplied as an accessory.

(Double-click "Setup.exe" in the CD-ROM and install the application in accordance with the instructions in the screen)

Connecting the Camera and Personal Computer by Network

IP Address

To connect to the network, the administrator needs to set the network camera IP address.

There are two options to set the IP address.

・Obtaining an IP address automatically from the DHCP server

・Entering an IP address manually(→page 86)

●Obtaining an IP address automatically from the DHCP server

Your camera is set to get data automatically from the DHCP server (DHCP ON/OFF is set to ON in "Network/Basic Settings") by default. If your network is using DHCP server, you will not need to change the IP address of the camera.

●Entering the IP address manually.

･Manually enter the IP address when the DHCP server is not used or when the DHCP server is not utilized even though it is connected.

･The IP address of the network camera is sometimes updated or changed from time to time when the DHCP server is used. For this reason, the network camera sometimes cannot be connected due to an IP address change if the network camera is accessed using the previously set IP address.

To enable accessing the network camera in this case, a fixed IP ad- dress needs be set with the network camera by setting an IP address through manual input. Please read the instruction manuals of the network system equipment also carefully such as the router, hub and modem.

･When entering the IP address manually, set DHCP ON/OFF to OFF in "Network Basic Setting" on page 86 and enter the IP address, subnet mask, default gateway, primary DNS and secondary DNS.

Introduction

and

Viewing

Operation

Listening

 

・

Recording

Set up

Others

24

25

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Model IK-WB21A Terms and Trademarks IntroductionFccus Information Tested To Comply With FCC Standards For Home or Office USETable of Contents Setting ･ Recording by alarmRecording Images on FTP Server ･ Scheduled RecordingImportant Safeguards Important Safeguards Specifications Precautions for UseAC adaptor SD Memory CardOverview of the Network Camera Features of the CameraNames of Camera Parts Installing the CameraRemove the terminal cover Connect the AC adapter cable and LAN cable to the cameraAC adapter cable LAN cable When installing on ceilingMount the camera on the ceiling attachment Install the cover for mounting on a ceilingRemoving the camera from the ceiling attachment Turning on the Power Connecting the Power CordIP Address Items needed for network camera monitoring systemTest the camera connection using ping Connection ConfigurationSet the IP address of the personal computer Click the Administrator button or the User button Click the camera you want to login from the list of camerasOperation Administrator Log-in and User Log-inAdministrator Log-in Screen and User Log-in Screen Setup ScreenViewing and listening Browser setting when proxy server is usedViewing images Log-in the cameraCamera image screen AudioMoving the screen center Number and Item DescriptionController Preset button. The preset control panel willPresetting of Camera Position by Administrator Configuring a Preset Selecting a PresetAssign the camera position in the Preset list Preset Name Settings Setup Preset ItemsPreset Position Settings Playing Recorded Normal Images Playing Recorded Alarm ImagesAudio Out Click Camera Settings on the Admin. menu. ThenClick Audio in the sub menu Camera Image screen and set to displayClick Camera Settings on the Admin. Menu Record setting Insert SD memory card to the cameraAbout Recording Images Click Recording in the sub menuClick Camera Settings in the Admin. Menu Configure each setting itemsClick the Save button under the items Deleting Record FileClick the Save button to save settings Record settingRecording Images on FTP Server Click FTP Recording in the sub menuFTP Server Usage Transfer Image SizeScheduled Recording Displayed if Scheduled Recording is chosen as an FTPEX/MD SD card back up File Transfer Order Scheduled Recording ･ The setup screen for Jpeg Local Saving will appearImages Jpeg files can be recorded in a personal computer ･ Jpeg file will appear on the personal computer･ The setup screen for Wave Local Saving will appear SettingClick an item in the sub menu desired to set Sound can be recorded in a personal computer wav fileClick 1. General in the sub menu Camera/Basic SettingsTemperature Overview Characteristics Remarks CameraOperating color AutomaticallyMiddle LOWHigh Click Camera Settings on the Administrator Setup Camera/Alarm SettingsSetup 3 Item setting MenuClick 5. E-mail in the sub menu Camera/E-mail SettingsOFF Operation Introduction Click 6. Audio in the sub menu Camera/Audio SettingsClick PAN/TILT Settings in the Admin. Menu PAN/TILT Basic SettingsClick 2. Preset in the sub menu PAN/TILT Preset Settings･ a setup screen of PAN/TILT Preset Settings will appear PAN/TILT Auto Patrol Click PAN/TILT Settings in the Administrator Setup menuPAN/TILT Operation Range Click 3. Auto Patrol in the sub menuClick Network Settings in the Admin. Menu Network Basic Settings･ The sub menu for Network Settings will appear ･ a setup screen of Network Basic Settings will appearNetwork / FTP Server Settings Network/DDNS SettingsClick 2. Ddns in the sub menu Click 3. FTP Server in the sub menu･ The sub menu for multi screen display setting will appear Click Multi Screen Display in the Admin. MenuClick 1. Adding and Removing Cameras in the sub menu Click 1. Changing ID/Password in the sub menu Click Admin. Function in the Admin. MenuAdministrator log-in name and password can be set ･ The sub menu for administrator functions will appear･ The sub menu for administrator function will appear Click Admin. Functions in the Admin. MenuClick 2. User Operation Restriction in the sub menu Click 3. Date and Time in the sub menuClick the Browse... button Click 4. FW Update in the sub menuSelect the file for the latest firmware saved in First step Click the Upload button in the screen for StepSelect a saved setup file Click Configuration Information in the sub menuReset all set values to factory defaults Network Camera RebootingClick Log Management in the Admin. Menu Alarm TerminalsLooking up the log or setup items Click 1. Browse and Delete in the sub menuGlossary Index Specifications of Alarm SignalsExample Circuit Connection FTP LANJpeg LiveOutput message Message Log Display109 Before Calling Service Personnel Before Calling Service Personnel... 114 116 117 Others SpecificationsInstalled on desk Unit mm inches Installed on ceiling Appearance DiagramVersion 2, June GNU General Public LicensePreamble 125 END of Terms and Conditions No WarrantyToshiba America Information SYSTEMS. INC
Top Page Image Contents