Toshiba IK-WB21A manual Overview of the Network Camera, Features of the Camera

Page 8

and Operation

Introduction

Viewing ・ Listening

Recording

Set up

Others

Overview of the Network Camera

The IK-WB21A network camera can deliver video images and sound in real time using the Internet or an intranet. The camera is equipped with Ethernet (RJ- 45) 10BASE-T/100BASE-TX network interfaces.

IK-WB21A can be used in various indoor environments.

IK-WB21A

Features of the Camera

●Built-in pan/tilt mechanism

A built-in pan (left/right) and tilt (up/down) mechanism enables you to use the Internet browser to change the direction of the camera lens. The camera also comes with Scan, Presets, Auto Patrol and various other monitoring features.

●Motor powered 22x zoom lens

Allows maximum magnification of 22 times.

●A high-resolution picture element CCD packaged

A high-resolution picture element progressive CCD (charge coupled device) built in the camera enables delivery of pictures maximum 1280 x 960 pixels. High-resolution pictures equal to those of a digital camera are delivered.

●Supports multiple cameras

Toshiba's original protocol, RNCP, allows Toshiba network cameras to identify each other on the same network. This enables images from automatically identified network cameras to be displayed in multi-view screen in the same browser window.

The number of windows in the multi-view display automatically changes (4 (2 x 2) or 9(3 x 3) windows) accordingly to the number of identified cameras. The cameras on other networks can be displayed on the same multi-view display screen by registering the cameras manually.

●Interactive two-way audio communication equipment. Camera supports interactive two way audio communication.

●Mailing function

This feature allows you to receive mail messages with images when alarms go off.

●Built-in SD memory card interface

The use of SD memory cards enables the recording of images for long periods of time, as well as recordings when alarms go off.

SD memory card:

8, 16, 32, 64, 128, 256, and 512 MB, 1 GB SD memory

 

cards (3.3 V) supported.

Physical interface:

Part 1. Physical Layer Specification; Version 1.01

●Motion detection

The camera incorporates the motion detector to generate an alarm.

●Slow-shutter function assures color images even at low illuminance

The slow-shutter function enables high-sensitivity monitoring during the night.

Introduction

and

Viewing

Operation

Listening

 

・

Recording

Set up

Others

14

15

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Model IK-WB21A Introduction Terms and TrademarksFccus Information Tested To Comply With FCC Standards For Home or Office USETable of Contents ･ Recording by alarm SettingRecording Images on FTP Server ･ Scheduled RecordingImportant Safeguards Important Safeguards Precautions for Use SpecificationsAC adaptor SD Memory CardFeatures of the Camera Overview of the Network CameraInstalling the Camera Names of Camera PartsRemove the terminal cover Connect the AC adapter cable and LAN cable to the cameraWhen installing on ceiling AC adapter cable LAN cableRemoving the camera from the ceiling attachment Install the cover for mounting on a ceilingMount the camera on the ceiling attachment Connecting the Power Cord Turning on the PowerItems needed for network camera monitoring system IP AddressSet the IP address of the personal computer Connection ConfigurationTest the camera connection using ping Click the camera you want to login from the list of cameras Click the Administrator button or the User buttonAdministrator Log-in and User Log-in OperationSetup Screen Administrator Log-in Screen and User Log-in ScreenBrowser setting when proxy server is used Viewing and listeningViewing images Log-in the cameraAudio Camera image screenMoving the screen center Number and Item DescriptionPreset button. The preset control panel will ControllerPresetting of Camera Position by Administrator Assign the camera position in the Preset list Selecting a PresetConfiguring a Preset Preset Position Settings Setup Preset ItemsPreset Name Settings Playing Recorded Alarm Images Playing Recorded Normal ImagesClick Camera Settings on the Admin. menu. Then Audio OutClick Audio in the sub menu Camera Image screen and set to displayRecord setting Insert SD memory card to the camera Click Camera Settings on the Admin. MenuAbout Recording Images Click Recording in the sub menuConfigure each setting items Click Camera Settings in the Admin. MenuClick the Save button under the items Deleting Record FileRecord setting Click the Save button to save settingsRecording Images on FTP Server Click FTP Recording in the sub menuTransfer Image Size FTP Server UsageScheduled Recording Displayed if Scheduled Recording is chosen as an FTPEX/MD SD card back up ･ The setup screen for Jpeg Local Saving will appear File Transfer Order Scheduled RecordingImages Jpeg files can be recorded in a personal computer ･ Jpeg file will appear on the personal computerSetting ･ The setup screen for Wave Local Saving will appearClick an item in the sub menu desired to set Sound can be recorded in a personal computer wav fileCamera/Basic Settings Click 1. General in the sub menuOverview Characteristics Remarks Camera TemperatureOperating color AutomaticallyHigh LOWMiddle Camera/Alarm Settings Click Camera Settings on the Administrator SetupSetup 3 Item setting MenuOFF Camera/E-mail SettingsClick 5. E-mail in the sub menu Operation Introduction Camera/Audio Settings Click 6. Audio in the sub menuPAN/TILT Basic Settings Click PAN/TILT Settings in the Admin. Menu･ a setup screen of PAN/TILT Preset Settings will appear PAN/TILT Preset SettingsClick 2. Preset in the sub menu Click PAN/TILT Settings in the Administrator Setup menu PAN/TILT Auto PatrolPAN/TILT Operation Range Click 3. Auto Patrol in the sub menuNetwork Basic Settings Click Network Settings in the Admin. Menu･ The sub menu for Network Settings will appear ･ a setup screen of Network Basic Settings will appearNetwork/DDNS Settings Network / FTP Server SettingsClick 2. Ddns in the sub menu Click 3. FTP Server in the sub menuClick 1. Adding and Removing Cameras in the sub menu Click Multi Screen Display in the Admin. Menu･ The sub menu for multi screen display setting will appear Click Admin. Function in the Admin. Menu Click 1. Changing ID/Password in the sub menuAdministrator log-in name and password can be set ･ The sub menu for administrator functions will appearClick Admin. Functions in the Admin. Menu ･ The sub menu for administrator function will appearClick 2. User Operation Restriction in the sub menu Click 3. Date and Time in the sub menuClick 4. FW Update in the sub menu Click the Browse... buttonSelect the file for the latest firmware saved in First step Click the Upload button in the screen for StepClick Configuration Information in the sub menu Select a saved setup fileReset all set values to factory defaults Network Camera RebootingAlarm Terminals Click Log Management in the Admin. MenuLooking up the log or setup items Click 1. Browse and Delete in the sub menuExample Circuit Connection Specifications of Alarm SignalsGlossary Index LAN FTPJpeg LiveLog Display Output message Message109 Before Calling Service Personnel Before Calling Service Personnel... 114 116 117 Specifications OthersAppearance Diagram Installed on desk Unit mm inches Installed on ceilingPreamble GNU General Public LicenseVersion 2, June 125 No Warranty END of Terms and ConditionsToshiba America Information SYSTEMS. INC
Top Page Image Contents