Toshiba IK-WB21A manual Important Safeguards

Page 5

and Operation

Introduction

Viewing ・ Listening

Recording

Set up

Others

IMPORTANT SAFEGUARDS (Cont.)

9.Ventilation

This camera should never be placed near or over a radiator or heat register. This camera should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.

10.Power Sources

This camera should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your location, consult your product dealer.

11. Power-Cord Protection

Power-Supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, screws and the point where they exit from the product.

12. Installation

This camera should be installed on a firm and solid part of the ceiling or wall. If installed on a soft and weak place, the camera unit may fall. A person under it may be injured and things under it may be damaged.

13. Lightning

For added protection for this camera during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the outlet and disconnect the power supply and cable system. This will prevent damage to the camera due to lightning and power-line surges. If lightning occurs, do not touch the unit or any connected cables in order to avoid electric shock.

14. Overloading

Do not overload power supply and extension cords as this can result in a risk of fire or electric shock.

15. Object and Liquid Entry

Never push objects of any kind into this camera through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electrical shock. Never spill liquid of any kind on the camera.

16. Servicing

Do not attempt to service this camera yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

17. Damage Requiring Service

Disconnect this camera from the power supply and refer servicing to qualified service personnel under the following conditions.

a.When the power-supply cord or plug is damaged.

b.If liquid has been spilled, or objects have fallen into the camera.

c.If the camera has been exposed to rain or water.

d.If the camera does not operate normally by following the operating instructions in the instruction manual. Adjust only those controls that are covered by the instruction manual as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the camera to its normal operation.

e.If the camera has been dropped or the cabinet has been damaged.

f.When the camera exhibits a distinct change in performance-this indicates a need for service.

18. Replacement Parts

When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer with the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

19. Safety Check

Upon completion of any service or repairs to this camera, ask the service technician to perform safety checks to determine that the camera is in proper operating condition.

Introduction

and

Viewing

Operation

Listening

 

・

Recording

Set up

Others

8

9

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Model IK-WB21A Terms and Trademarks IntroductionFccus Information Tested To Comply With FCC Standards For Home or Office USETable of Contents Setting ･ Recording by alarmRecording Images on FTP Server ･ Scheduled RecordingImportant Safeguards Important Safeguards Specifications Precautions for UseAC adaptor SD Memory CardOverview of the Network Camera Features of the CameraNames of Camera Parts Installing the CameraRemove the terminal cover Connect the AC adapter cable and LAN cable to the cameraAC adapter cable LAN cable When installing on ceilingRemoving the camera from the ceiling attachment Install the cover for mounting on a ceilingMount the camera on the ceiling attachment Turning on the Power Connecting the Power CordIP Address Items needed for network camera monitoring systemSet the IP address of the personal computer Connection ConfigurationTest the camera connection using ping Click the Administrator button or the User button Click the camera you want to login from the list of camerasOperation Administrator Log-in and User Log-inAdministrator Log-in Screen and User Log-in Screen Setup ScreenViewing and listening Browser setting when proxy server is usedViewing images Log-in the cameraCamera image screen AudioMoving the screen center Number and Item DescriptionController Preset button. The preset control panel willPresetting of Camera Position by Administrator Assign the camera position in the Preset list Selecting a PresetConfiguring a Preset Preset Position Settings Setup Preset ItemsPreset Name Settings Playing Recorded Normal Images Playing Recorded Alarm ImagesAudio Out Click Camera Settings on the Admin. menu. ThenClick Audio in the sub menu Camera Image screen and set to displayClick Camera Settings on the Admin. Menu Record setting Insert SD memory card to the cameraAbout Recording Images Click Recording in the sub menuClick Camera Settings in the Admin. Menu Configure each setting itemsClick the Save button under the items Deleting Record FileClick the Save button to save settings Record settingRecording Images on FTP Server Click FTP Recording in the sub menuFTP Server Usage Transfer Image SizeScheduled Recording Displayed if Scheduled Recording is chosen as an FTPEX/MD SD card back up File Transfer Order Scheduled Recording ･ The setup screen for Jpeg Local Saving will appearImages Jpeg files can be recorded in a personal computer ･ Jpeg file will appear on the personal computer･ The setup screen for Wave Local Saving will appear SettingClick an item in the sub menu desired to set Sound can be recorded in a personal computer wav fileClick 1. General in the sub menu Camera/Basic SettingsTemperature Overview Characteristics Remarks CameraOperating color AutomaticallyHigh LOWMiddle Click Camera Settings on the Administrator Setup Camera/Alarm SettingsSetup 3 Item setting MenuOFF Camera/E-mail SettingsClick 5. E-mail in the sub menu Operation Introduction Click 6. Audio in the sub menu Camera/Audio SettingsClick PAN/TILT Settings in the Admin. Menu PAN/TILT Basic Settings･ a setup screen of PAN/TILT Preset Settings will appear PAN/TILT Preset SettingsClick 2. Preset in the sub menu PAN/TILT Auto Patrol Click PAN/TILT Settings in the Administrator Setup menuPAN/TILT Operation Range Click 3. Auto Patrol in the sub menuClick Network Settings in the Admin. Menu Network Basic Settings･ The sub menu for Network Settings will appear ･ a setup screen of Network Basic Settings will appearNetwork / FTP Server Settings Network/DDNS SettingsClick 2. Ddns in the sub menu Click 3. FTP Server in the sub menuClick 1. Adding and Removing Cameras in the sub menu Click Multi Screen Display in the Admin. Menu･ The sub menu for multi screen display setting will appear Click 1. Changing ID/Password in the sub menu Click Admin. Function in the Admin. MenuAdministrator log-in name and password can be set ･ The sub menu for administrator functions will appear･ The sub menu for administrator function will appear Click Admin. Functions in the Admin. MenuClick 2. User Operation Restriction in the sub menu Click 3. Date and Time in the sub menuClick the Browse... button Click 4. FW Update in the sub menuSelect the file for the latest firmware saved in First step Click the Upload button in the screen for StepSelect a saved setup file Click Configuration Information in the sub menuReset all set values to factory defaults Network Camera RebootingClick Log Management in the Admin. Menu Alarm TerminalsLooking up the log or setup items Click 1. Browse and Delete in the sub menuExample Circuit Connection Specifications of Alarm SignalsGlossary Index FTP LANJpeg LiveOutput message Message Log Display109 Before Calling Service Personnel Before Calling Service Personnel... 114 116 117 Others SpecificationsInstalled on desk Unit mm inches Installed on ceiling Appearance DiagramPreamble GNU General Public LicenseVersion 2, June 125 END of Terms and Conditions No WarrantyToshiba America Information SYSTEMS. INC
Top Page Image Contents