Toshiba IK-WB21A manual Configure each setting items, Click the Save button under the items

Page 27

and Operation

Introduction

Viewing ・ Listening

Recording

Set up

Others

Recording Images in SD Memory Card (Cont.)

4 Configure each setting items.

■Alarm Recording

●Alarm In

ON: Images are recorded when an external alarm occurs.

OFF: Images are not recorded when an external alarm occurs.

●Ext. Control In

ON: External control recording is performed.

OFF: External control recording is not performed.

●Motion Detection

ON: Images are recorded when motion is detected.

OFF: Images are not recorded when motion is detected.

●Pre-Recording

Set the number of images to be recorded immediately before an alarm occurs. Images of the moment when an alarm occurs are not included.

●Post-Recording

Set the number of images to be recorded immediately after an alarm occurs. Images of the moment when an alarm occurs are not included.

●Recording cycle

Set a time interval for alarm recording.

■Continuous Recording

ON: Images are recorded in accordance with schedule and recording in- terval.

Setting to ON will set a recording schedule and interval. OFF: Continuous recording is not performed.

■ Overwrite

ON: Records are overwritten beginning with old records when the capac- ity of the SD memory card becomes full during recording.

OFF: Recording is stopped when the capacity of the SD memory card be- comes full during recording.

5 Click the Save button under the items.

･Changes are saved.

NOTE

●Clicking the Reset button under each item resets to the setting last saved.

●Clicking the Default button resets settings back to factory default.

●The total number of recorded frames per alarm will be the number of pre- alarm images + One image when alarm occurs + Number of post-alarm images

●To enable "Alarm In", see the "Camera/Alarm Settings" on page 73.

●To enable "Ext. Control In", see the "Camera/Alarm Settings" on page 73.

●Setting the Overwrite mode to ON deletes files beginning with old files. If important data is to be saved, set the Overwrite mode to OFF.

●Getting a record list of the SD memory card sometimes takes more than 5 minutes after turning the power on. Data cannot be recorded while obtaining a record list.

●The camera recording period may not operate as set depending on the type of the SD memory card.

Deleting Record File

Image files recorded in an SD memory card can be deleted.

1 Click "Camera Settings" in the Admin. Menu.

･A sub menu for Camera settings will appear.

2 Click "Recording" in the sub menu.

･A setup screen for Camera/Recording will appear.

3 Click "Delete all", "Delete from Alarm Recording list...", "Delete from Continuous Recording list..." or "Delete from Ext. Control In Recording list..." in Recorded Files.

･Clicking "Delete all" deletes all record files.

･Clicking "Delete from Alarm Recording list..." displays an alarm list. Specifying a range for deletion deletes alarm record files.

･Clicking "Delete from Continuous Recording list..." displays a normal list. Specifying a scope for deletion deletes normal record files.

･Clicking "Delete from Ext. Control In Recording list..." displays an external control record list. Specifying a scope for deletion deletes external control record files.

Introduction

and

Viewing

Operation

Listening

 

・

Recording

Set up

Others

52

53

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Model IK-WB21A For Home or Office USE IntroductionTerms and Trademarks Fccus Information Tested To Comply With FCC StandardsTable of Contents ･ Scheduled Recording ･ Recording by alarmSetting Recording Images on FTP ServerImportant Safeguards Important Safeguards SD Memory Card Precautions for UseSpecifications AC adaptorOverview of the Network Camera Features of the CameraConnect the AC adapter cable and LAN cable to the camera Installing the CameraNames of Camera Parts Remove the terminal coverAC adapter cable LAN cable When installing on ceilingInstall the cover for mounting on a ceiling Mount the camera on the ceiling attachmentRemoving the camera from the ceiling attachment Turning on the Power Connecting the Power CordIP Address Items needed for network camera monitoring systemConnection Configuration Test the camera connection using pingSet the IP address of the personal computer Click the Administrator button or the User button Click the camera you want to login from the list of camerasOperation Administrator Log-in and User Log-inAdministrator Log-in Screen and User Log-in Screen Setup ScreenLog-in the camera Browser setting when proxy server is usedViewing and listening Viewing imagesNumber and Item Description AudioCamera image screen Moving the screen centerController Preset button. The preset control panel willPresetting of Camera Position by Administrator Selecting a Preset Configuring a PresetAssign the camera position in the Preset list Setup Preset Items Preset Name SettingsPreset Position Settings Playing Recorded Normal Images Playing Recorded Alarm ImagesCamera Image screen and set to display Click Camera Settings on the Admin. menu. ThenAudio Out Click Audio in the sub menuClick Recording in the sub menu Record setting Insert SD memory card to the cameraClick Camera Settings on the Admin. Menu About Recording ImagesDeleting Record File Configure each setting itemsClick Camera Settings in the Admin. Menu Click the Save button under the itemsClick FTP Recording in the sub menu Record settingClick the Save button to save settings Recording Images on FTP ServerDisplayed if Scheduled Recording is chosen as an FTP Transfer Image SizeFTP Server Usage Scheduled RecordingEX/MD SD card back up ･ Jpeg file will appear on the personal computer ･ The setup screen for Jpeg Local Saving will appearFile Transfer Order Scheduled Recording Images Jpeg files can be recorded in a personal computerSound can be recorded in a personal computer wav file Setting･ The setup screen for Wave Local Saving will appear Click an item in the sub menu desired to setClick 1. General in the sub menu Camera/Basic SettingsAutomatically Overview Characteristics Remarks CameraTemperature Operating colorLOW MiddleHigh Menu Camera/Alarm SettingsClick Camera Settings on the Administrator Setup Setup 3 Item settingCamera/E-mail Settings Click 5. E-mail in the sub menuOFF Operation Introduction Click 6. Audio in the sub menu Camera/Audio SettingsClick PAN/TILT Settings in the Admin. Menu PAN/TILT Basic SettingsPAN/TILT Preset Settings Click 2. Preset in the sub menu･ a setup screen of PAN/TILT Preset Settings will appear Click 3. Auto Patrol in the sub menu Click PAN/TILT Settings in the Administrator Setup menuPAN/TILT Auto Patrol PAN/TILT Operation Range･ a setup screen of Network Basic Settings will appear Network Basic SettingsClick Network Settings in the Admin. Menu ･ The sub menu for Network Settings will appearClick 3. FTP Server in the sub menu Network/DDNS SettingsNetwork / FTP Server Settings Click 2. Ddns in the sub menuClick Multi Screen Display in the Admin. Menu ･ The sub menu for multi screen display setting will appearClick 1. Adding and Removing Cameras in the sub menu ･ The sub menu for administrator functions will appear Click Admin. Function in the Admin. MenuClick 1. Changing ID/Password in the sub menu Administrator log-in name and password can be setClick 3. Date and Time in the sub menu Click Admin. Functions in the Admin. Menu･ The sub menu for administrator function will appear Click 2. User Operation Restriction in the sub menuClick the Upload button in the screen for Step Click 4. FW Update in the sub menuClick the Browse... button Select the file for the latest firmware saved in First stepNetwork Camera Rebooting Click Configuration Information in the sub menuSelect a saved setup file Reset all set values to factory defaultsClick 1. Browse and Delete in the sub menu Alarm TerminalsClick Log Management in the Admin. Menu Looking up the log or setup itemsSpecifications of Alarm Signals Glossary IndexExample Circuit Connection Live LANFTP JpegOutput message Message Log Display109 Before Calling Service Personnel Before Calling Service Personnel... 114 116 117 Others SpecificationsInstalled on desk Unit mm inches Installed on ceiling Appearance DiagramGNU General Public License Version 2, JunePreamble 125 END of Terms and Conditions No WarrantyToshiba America Information SYSTEMS. INC
Top Page Image Contents