Toshiba IK-WB21A manual Specifications, Others

Page 60

and Operation

Introduction

Viewing Listening

Recording

Set up

Others

Before Calling Service Personnel... (Cont.)

Others

When very strong light strikes at the lens, you might see stripe patterns (smear) on the images, but these are not malfunctions. If this happens, reinstall the camera in another place, or try to change the direction of the lens.

Audio may not always synchronize with the camera images.

If mechanical parts, such as PAN/TILT, are moved by hand etc., unusual Audio may occur from the mechanical parts during operation after that. This is not a malfunction. In such a case, please push the button of the controller and correct a gap.

Specifications

Model Name

IK-WB21A

Power supply

DC 12V ±10% (Use AC adapter supplied as an accessory)

Power consumption

Approx.10W

Image pickup device

1/4.2CCD

Effective picture elements

Horizontal 648, vertical 486 x 2 629,865 pixels

 

(honeycomb array)

Effective pixel area size

Horizontal 3.4992mm, vertical 2.6244mm

Scanning system

Progressive scanning

Synchronization system

Internal synchronization

Minimum object illuminance

16 lx (1/30s F1.6 AGC HIGH) 4 lx (1/75s F1.6 AGC HIGH)

 

0.13 lx (4sF1.6 AGC HIGH)

White balance

Auto (AWB) (2500 to 7000K), manual and 4 other fixed WBs

Rear light correction

OFF/auto. 5 areas can be designated.

Pan

-175to +175

Tilt

Desktop -30to +90, ceiling -90to +30

Rotation speed

PAN: 300(maximum) / sec TILT: 200(maximum) / sec

Zoom lens

Optical 22x motor powered zooming (f = 4.0 to 88.0mm)

F value

F1.6 (F3.8 at telephoto end)

Picture angle

Wide end: Diagonal 5601', horizontal 4611', vertical 3531'

 

Telephoto end: Diagonal 245', horizontal 213', vertical 139'

Focus adjustment

Auto/manual

Minimum focal distance

Wide end 10mm (macro mode), telephoto end: 1m

Lens aperture

Auto/manual

Brightness adjustment

Available (-99 to 99, target value adjusted)

Electronic high sensitivity

OFF: 1/7.5s (x4),1/3.75s(x8),1/2.5s(x12),1/1.8s(x16),1s(x30),2s(x60),4s(x120)

 

OFF:1/30s [1/33s when flicker is corrected] In parentheses ( )

 

are magnifications of increased sensitivity to 1/30s

Alarm terminal

Input 1, output 1

Image size

1280 x 960 (SXVGA), 640 x 480 (VGA), 320 x 240 (QVGA)

 

and 160 x 120 (QQVGA) pixels

Image compression system

JPEG M-JPEG

Image quality setting

5 levels

Output image size

SXVA/VGA/QVGA/QQVGA (SXVGA: 1280 x 960)

Maximum frame rate *1

SXVGA 7.5fps (Network output VGA/QVGA/QAQVGA: 30fps)

Number of simultaneous deliveries

10 clients(maximum), Audio: 10 clients(maximum)

for image or audio Image

 

Audio *2

MIC input terminal: 3.5mm monaural mini jack, plug-in power

 

specification

 

Line output terminal: 3.5mm monaural mini jack

Motion alarm function

Available

Image recording function

Available

Recording medium

SD memory card (option)

E-mail notification function

Available

Network interface

Standard: IEEE 802.3, type 10BASE-T, 100BASE-TX,

 

connector RJ-45

Protocols

TCP/IP, UDP/IP, HTTP, SMTP, DNS, FTPc, FTPs, DDNS, NTPc,

 

DHCPc, ICMP, RNCP, ARP

OS and browser

Windows2000, Windows XP, InternetExplorwe6.0sp1

Guaranteed operating temperature

14F to 104F

Guaranteed operating humidity

90% RH or less (no condensation)

Storage temperature

-4F to 140F

Mass

About 1.587lbs (camera only)

External dimensions

114(W)x136(H)x114(D)mm, 4.448(W)x5.354(H)x4.488(D)inch, camera only

Accessories

AC adapter (1), power cord (1), DC extension cable, mount cover (1)

 

, mount attachment (1), mounting screws (4), users guide (CD-

 

ROM), Anchor (4), quick guide, caution label, ferrite cores (1), warranty

*1: Varies in accordance with the object, image quality, network environment and performance of the personal computer used.

*2: The sound may not be clear depending on the conditions of the lines.

Designs and specifications may change without prior notice for better improvement.

Screens, photos, illustrations and other diagrams contained in this user's guide may slightly change from actual ones.

Introduction

and

Viewing

Operation

Listening

 

Recording

Set up

Others

118

119

Image 60
Contents Model IK-WB21A Introduction Terms and TrademarksFccus Information Tested To Comply With FCC Standards For Home or Office USETable of Contents ・ Recording by alarm SettingRecording Images on FTP Server ・ Scheduled RecordingImportant Safeguards Important Safeguards Precautions for Use SpecificationsAC adaptor SD Memory CardFeatures of the Camera Overview of the Network CameraInstalling the Camera Names of Camera PartsRemove the terminal cover Connect the AC adapter cable and LAN cable to the cameraWhen installing on ceiling AC adapter cable LAN cableInstall the cover for mounting on a ceiling Mount the camera on the ceiling attachmentRemoving the camera from the ceiling attachment Connecting the Power Cord Turning on the PowerItems needed for network camera monitoring system IP AddressConnection Configuration Test the camera connection using pingSet the IP address of the personal computer Click the camera you want to login from the list of cameras Click the Administrator button or the User buttonAdministrator Log-in and User Log-in OperationSetup Screen Administrator Log-in Screen and User Log-in ScreenBrowser setting when proxy server is used Viewing and listeningViewing images Log-in the cameraAudio Camera image screenMoving the screen center Number and Item DescriptionPreset button. The preset control panel will ControllerPresetting of Camera Position by Administrator Selecting a Preset Configuring a PresetAssign the camera position in the Preset list Setup Preset Items Preset Name SettingsPreset Position Settings Playing Recorded Alarm Images Playing Recorded Normal ImagesClick Camera Settings on the Admin. menu. Then Audio OutClick Audio in the sub menu Camera Image screen and set to displayRecord setting Insert SD memory card to the camera Click Camera Settings on the Admin. MenuAbout Recording Images Click Recording in the sub menuConfigure each setting items Click Camera Settings in the Admin. MenuClick the Save button under the items Deleting Record FileRecord setting Click the Save button to save settingsRecording Images on FTP Server Click FTP Recording in the sub menuTransfer Image Size FTP Server UsageScheduled Recording Displayed if Scheduled Recording is chosen as an FTPEX/MD SD card back up ・ The setup screen for Jpeg Local Saving will appear File Transfer Order Scheduled RecordingImages Jpeg files can be recorded in a personal computer ・ Jpeg file will appear on the personal computerSetting ・ The setup screen for Wave Local Saving will appearClick an item in the sub menu desired to set Sound can be recorded in a personal computer wav fileCamera/Basic Settings Click 1. General in the sub menuOverview Characteristics Remarks Camera TemperatureOperating color AutomaticallyLOW MiddleHigh Camera/Alarm Settings Click Camera Settings on the Administrator SetupSetup 3 Item setting MenuCamera/E-mail Settings Click 5. E-mail in the sub menuOFF Operation Introduction Camera/Audio Settings Click 6. Audio in the sub menuPAN/TILT Basic Settings Click PAN/TILT Settings in the Admin. MenuPAN/TILT Preset Settings Click 2. Preset in the sub menu・ a setup screen of PAN/TILT Preset Settings will appear Click PAN/TILT Settings in the Administrator Setup menu PAN/TILT Auto PatrolPAN/TILT Operation Range Click 3. Auto Patrol in the sub menuNetwork Basic Settings Click Network Settings in the Admin. Menu・ The sub menu for Network Settings will appear ・ a setup screen of Network Basic Settings will appearNetwork/DDNS Settings Network / FTP Server SettingsClick 2. Ddns in the sub menu Click 3. FTP Server in the sub menuClick Multi Screen Display in the Admin. Menu ・ The sub menu for multi screen display setting will appearClick 1. Adding and Removing Cameras in the sub menu Click Admin. Function in the Admin. Menu Click 1. Changing ID/Password in the sub menuAdministrator log-in name and password can be set ・ The sub menu for administrator functions will appearClick Admin. Functions in the Admin. Menu ・ The sub menu for administrator function will appearClick 2. User Operation Restriction in the sub menu Click 3. Date and Time in the sub menuClick 4. FW Update in the sub menu Click the Browse... buttonSelect the file for the latest firmware saved in First step Click the Upload button in the screen for StepClick Configuration Information in the sub menu Select a saved setup fileReset all set values to factory defaults Network Camera RebootingAlarm Terminals Click Log Management in the Admin. MenuLooking up the log or setup items Click 1. Browse and Delete in the sub menuSpecifications of Alarm Signals Glossary IndexExample Circuit Connection LAN FTPJpeg LiveLog Display Output message Message109 Before Calling Service Personnel Before Calling Service Personnel... 114 116 117 Specifications OthersAppearance Diagram Installed on desk Unit mm inches Installed on ceilingGNU General Public License Version 2, JunePreamble 125 No Warranty END of Terms and ConditionsToshiba America Information SYSTEMS. INC