Toshiba IK-WB21A manual Precautions for Use, AC adaptor, SD Memory Card, Specifications

Page 7

and Operation

Introduction

Viewing ・ Listening

Recording

Set up

Others

Precautions for Use

SD Memory Card

●There is a limit to the number of rewrites that is possible with the SD memory card. Replacing the SD memory card when performing periodic maintenance of the camera is recommended.

●The camera supports the following SD memory cards. Do not use memory

cards with other specifications.

SD memory card: 64, 128, 256, and 512 MB, 1 GB SD memory cards (3.3 V) supported.

Physical interface: Part 1. Physical Layer Specification; Version 1.01

●Images may not be recorded or read correctly if an unsupported SD memory card is used with the camera.

●Carefully read the User's guide, precautions on use, and any other information supplied with a purchased memory card.

●An SD memory card can be used for the loop recording of images. The life- span (number of rewrites possible) of an SD memory card is greatly affected by the capacity of the SD memory card. The use of a 128, 256, or 512 MB, 1 GB large-capacity SD memory card is recommended for loop recording.

●To achieve maximum performance of the camera, the use of a Toshiba SD memory card is recommended. If a card of another company is used, the recording intervals may lengthen and the erasure time during overwriting may increase. As a result, the number of delivered frames of live video may decrease.

●Do not use a memory card containing the data recorded by another device with the camera as this may result in the camera not functioning correctly.

●Do not modify, overwrite the data, or change the folder name of an SD memory card. It may result in the camera not to function correctly.

●Data recorded with the camera do not comply with the image file format Exif and the DCF standard. If the SD memory card is to be removed to play images, use a personal computer to play the images. Other devices may not be capable of displaying the images.

AC adaptor

Be sure to use only the supplied AC adaptor. Using a different AC adaptor may cause the camera to malfunction, heat up, or catch fire. Before using the AC adaptor, carefully read and observe the Important Safety Instructions (→page 7) and the notes below.

●Do not allow the connectors on the AC adaptor to come into contact with any other metal object as this may result in short circuit.

●To connect the AC adaptor, firmly insert the plug end of the cable into the AC adaptor jack. Do not insert the plug into other jacks as this may cause a malfunction.

●When removing the connection cable, disconnect the cable by holding its plug. Do not disconnect the cable by pulling on the cable.

●Do not drop the AC adaptor or subject it to strong impact.

●Do not use the AC adaptor in hot and humid places.

●Do not use the supplied AC adaptor with devices other than this camera.

●Temperature increasing on the surface of the adaptor is normal. Before moving the adaptor to another location, unplug it from the wall outlet, and wait until its temperature decreases.

●Buzzing noises may come from inside. This does not indicate malfunction.

●Using the AC adaptor near a radio, TV, or cellphone may cause interference. Use the adaptor at sufficient distances from these devices.

Specifications

AC adapter (ADPV16A)

Power source

: AC 100-240V 50/60Hz 35W

Rated output

: DC 12V, 2A

Ambient temperature guaranteed for performance

 

:

23｡F to 104｡F

Storage temperature

:

23｡F to 149｡F

Maximum external dimensions (inch) :

1.713 x 1.043 x 3.543 inch (Width x height x depth)

Cord length

:

47.244 inch

Length of DC extension cable

:

118.11 inch

Introduction

and

Viewing

Operation

Listening

 

・

Recording

Set up

Others

12

13

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model IK-WB21A For Home or Office USE IntroductionTerms and Trademarks Fccus Information Tested To Comply With FCC StandardsTable of Contents ･ Scheduled Recording ･ Recording by alarmSetting Recording Images on FTP ServerImportant Safeguards Important Safeguards SD Memory Card Precautions for UseSpecifications AC adaptorOverview of the Network Camera Features of the CameraConnect the AC adapter cable and LAN cable to the camera Installing the CameraNames of Camera Parts Remove the terminal coverAC adapter cable LAN cable When installing on ceilingMount the camera on the ceiling attachment Install the cover for mounting on a ceilingRemoving the camera from the ceiling attachment Turning on the Power Connecting the Power CordIP Address Items needed for network camera monitoring systemTest the camera connection using ping Connection ConfigurationSet the IP address of the personal computer Click the Administrator button or the User button Click the camera you want to login from the list of camerasOperation Administrator Log-in and User Log-inAdministrator Log-in Screen and User Log-in Screen Setup ScreenLog-in the camera Browser setting when proxy server is usedViewing and listening Viewing imagesNumber and Item Description AudioCamera image screen Moving the screen centerController Preset button. The preset control panel willPresetting of Camera Position by Administrator Configuring a Preset Selecting a PresetAssign the camera position in the Preset list Preset Name Settings Setup Preset ItemsPreset Position Settings Playing Recorded Normal Images Playing Recorded Alarm ImagesCamera Image screen and set to display Click Camera Settings on the Admin. menu. ThenAudio Out Click Audio in the sub menuClick Recording in the sub menu Record setting Insert SD memory card to the cameraClick Camera Settings on the Admin. Menu About Recording ImagesDeleting Record File Configure each setting itemsClick Camera Settings in the Admin. Menu Click the Save button under the itemsClick FTP Recording in the sub menu Record settingClick the Save button to save settings Recording Images on FTP ServerDisplayed if Scheduled Recording is chosen as an FTP Transfer Image SizeFTP Server Usage Scheduled RecordingEX/MD SD card back up ･ Jpeg file will appear on the personal computer ･ The setup screen for Jpeg Local Saving will appearFile Transfer Order Scheduled Recording Images Jpeg files can be recorded in a personal computerSound can be recorded in a personal computer wav file Setting･ The setup screen for Wave Local Saving will appear Click an item in the sub menu desired to setClick 1. General in the sub menu Camera/Basic SettingsAutomatically Overview Characteristics Remarks CameraTemperature Operating colorMiddle LOWHigh Menu Camera/Alarm SettingsClick Camera Settings on the Administrator Setup Setup 3 Item settingClick 5. E-mail in the sub menu Camera/E-mail SettingsOFF Operation Introduction Click 6. Audio in the sub menu Camera/Audio SettingsClick PAN/TILT Settings in the Admin. Menu PAN/TILT Basic SettingsClick 2. Preset in the sub menu PAN/TILT Preset Settings･ a setup screen of PAN/TILT Preset Settings will appear Click 3. Auto Patrol in the sub menu Click PAN/TILT Settings in the Administrator Setup menuPAN/TILT Auto Patrol PAN/TILT Operation Range･ a setup screen of Network Basic Settings will appear Network Basic SettingsClick Network Settings in the Admin. Menu ･ The sub menu for Network Settings will appearClick 3. FTP Server in the sub menu Network/DDNS SettingsNetwork / FTP Server Settings Click 2. Ddns in the sub menu･ The sub menu for multi screen display setting will appear Click Multi Screen Display in the Admin. MenuClick 1. Adding and Removing Cameras in the sub menu ･ The sub menu for administrator functions will appear Click Admin. Function in the Admin. MenuClick 1. Changing ID/Password in the sub menu Administrator log-in name and password can be setClick 3. Date and Time in the sub menu Click Admin. Functions in the Admin. Menu･ The sub menu for administrator function will appear Click 2. User Operation Restriction in the sub menuClick the Upload button in the screen for Step Click 4. FW Update in the sub menuClick the Browse... button Select the file for the latest firmware saved in First stepNetwork Camera Rebooting Click Configuration Information in the sub menuSelect a saved setup file Reset all set values to factory defaultsClick 1. Browse and Delete in the sub menu Alarm TerminalsClick Log Management in the Admin. Menu Looking up the log or setup itemsGlossary Index Specifications of Alarm SignalsExample Circuit Connection Live LANFTP JpegOutput message Message Log Display109 Before Calling Service Personnel Before Calling Service Personnel... 114 116 117 Others SpecificationsInstalled on desk Unit mm inches Installed on ceiling Appearance DiagramVersion 2, June GNU General Public LicensePreamble 125 END of Terms and Conditions No WarrantyToshiba America Information SYSTEMS. INC
Top Page Image Contents