and Operation
Introduction
Viewing ・ Listening
Recording
Set up
Others
Camera/E-mail Settings (Cont.)
● Authentication Settings
1)Choose "SMTP" or "POP" as the authentication system.
2)Enter an SMTP IP address or server name in
3)Enter the following when "POP" is chosen in authentication.
| server. |
Enter a login ID for authentication. | |
"Password": | Input a password. |
"Password (confirm)": | Enter the same password again. |
4)Enter the administrator
･Clicking the "Test
NOTE
●You cannot use these characters: ' "
●Maximum of 16 of the following characters can be entered in
. (dot), - (hyphen), @, 0 - 9, a to z and A to Z
●If a server name is input instead of an IP address in
●Condition Settings for
1) Set ON or OFF in
ON:
OFF:
2)Enter a title in "Subject".
3)Enter a message in "Message."
4)Set ON or OFF in "Send URL."
ON: Adds server address information to message.
OFF: Does not add server address information to message.
Input address information such as network camera and FTP server if "ON" is selected.
5)Set "ON" or "OFF" in "Attach Image".
ON: Captured images are attached to
OFF: Images are not attached to
6)Choose "Attached Image Size" in the sizes shown below if "ON" is set for "Attach Image."
1280 x 960, 640 x 480, 320 x 240 and 160 x 120
●Condition Setting for
1) Set ON or OFF in
ON:
OFF:
2)Enter a title in "Subject".
3)Enter a message in "Message."
4)Set ON or OFF in "Send URL."
ON: Adds server address information to message.
OFF: Does not add server address information to message.
Enter address information such as network camera and FTP server if "ON" is selected.
5)Set ON or OFF for image attaching in "Attach Image." ON: Captured images are attached to
OFF: Images are not attached to
6)Choose "Attached Image Size" in the sizes shown below if "ON" is set for "Attach Image."
1280 x 960, 640 x 480, 320 x 240 and 160 x 120
Introduction | |
and | Viewing |
Operation | Listening |
| ・ |
Recording | |
Set up
Others
76 | 77 |