Toshiba IK-WB21A manual Ex/Md

and Operation

Introduction

Viewing ・ Listening

Recording

Set up

Others

Recording Images on FTP Server (Cont.)

■ Recording by alarm

(Displayed if "Alarm Recording" is chosen as an FTP record conditions.)

Set if recording by Alarm In/Motion Detection is desired.

･To detect external alarms or motion, set to enable "Alarm In" or "Motion Detection" in alarm setting (see page 73).

1)Setting number of pre-Recording

･Choose the number of images 0, 3, 5 or 10 images

2)Setting number of post-Recording

･Choose the number of images

0, 3, 5, 10, 20, 60 or 120 images

NOTE

●The number of recorded images may be decreased depending on the network condition, recording interval or other factor.

3)Setting a "Recording Cycle"

･Recording at a rate of one images per set time (seconds).

･Chose a time to set.

1/30, 1/15, 1/10, 1/5, 1/3 1/2, 1, 2, 3, 5, 10, 30, 60, 120 or 180 second

NOTE

●The cycle may shift depending on image size and networkingconditions.

4)Enter "Record File Name"

･Enter characters (no more than 16 characters) in the part described as (keyword).

File name will be shown like this:

e.g. EX (Keyword) yyyy mm dd HH MM SS ***N--A.JPG

NOTE

● You cannot use these characters: \ / : ; , ? * < > ‘ "

Followings are the meaning of each part.

EX/MD�	"EX" indicates this is the file for Alarm In.�
�	�
�	"MD" indicates this is the file for Motion Detection.�
�	�
(keyword)�	Enter user defined keyword. �
�	�
yyyymmdd�	Indicates date (Year, Month, Day). �
�	(e.g. January 1, 2004 → 2004 01 01)�
�	�
�	Indicates time (Hour, Minute, Second). �
HHMMSS�	(e.g. 23:59:00 → 23 59 00). �
�	Time is displayed in 24-hour time display.�
�	�
�	If the camera records more than one image at the same
***�	period, the order is indicated with 3-digit number. The bigger
�	the number, the newer (latest) the image.�
�	�
�	Indicates total number of generated alarm(s). when the
ーー�	number reaches to 99, it returns to 00 and starts adding
�	again. Reset to "00" also when the power is turned off.�
�	�
�	A: Pre-Alarm Recording images. �
A/B/C�	B: Image when alarm has generated. �
�	C: Post-Alarm Recording.�

5)Entering Server path

･Set a server path for recording of files. Ask your FTP server administrator if you have a question.

Introduction
and	Viewing
Operation	Listening
	・
Recording

Set up

Others

58 59