Toshiba IK-WB21A manual Camera/Basic Settings, Click 1. General in the sub menu

Page 34

and Operation

Introduction

Viewing ・ Listening

Recording

Set up

Others

Camera/Basic Settings

Basic items such as size and quality of delivered images of the camera can be set.

1 Click "Camera Settings" on the Admin. Menu.

･A sub menu for Camera Settings will appear.

2 Click "1. General" in the sub menu.

･The screen of "Camera - Basic Settings, Frame Rate" will appear.

3 Configure each setting items.

･Click the Save button to save settings.

･The settings will not be reflected unless the Save button is clicked.

NOTE

●This setting item can be set by user log-in also if the item is set correctly in the settings for "Admin. Functions/User Operation Restriction" (see page 94).

●Resolution

Configures resolution. Higher Resolution results in larger image

Possible settings： 1280×960 (SXVGA)／640×480 (VGA)／320× 240 (QVGA)／160×120 (QQVGA)

●Compression Ratio

Set quality of delivered images. The size of image files (JPEG files) varies in accordance with compression ratio.

Low compression: This setting produces highest image quality. The file size increases.

Mid-low compression:

Intermediate setting between standard and low compression rates.

Standard: Standard setting. Mid-high compression:

Intermediate setting between standard and high compression.

High compression: This setting produces lowest image quality. The file size decreases.

NOTE

●The picture quality and the file size change depending on the conditions of an object (splendor, resolution, movement).

●Size of the files affect the network and smaller file size may increase frame rate.

●Brightness Adjustment

The camera automatically adjusts the level of brightness of images. Adjust so that the image level becomes optimum in accordance with conditions of the object. Images become brighter higher the level is. Images are dark lower the level is.

NOTE

●The brightness level of images are controlled automatically by adjustment of the lens, AGC and slow shutter.

●Mounting Method

Set to install the camera.

Ceiling mount:

Suspended on a ceiling

Desktop:

When used on a desk

●Focus Range

Set an focusing range.

Standard: Auto focus is in focus when the distance between the cam-

era and object is more than 3 ft.

Macro: Auto focus is in focus when the distance between the cam- era and object is between 0.4 inch and 3ft.

NOTE

●Auto focusing is sometimes not possible when shooting through a glass pane, a flat object such as a wall and moving object. Achieve focusing of these objects by manual focusing.

●Auto focusing is sometimes disabled due to noise when the AGC function operates. Then adjust focusing in the Manual mode.

●Auto focusing is sometimes not possible when the object is dark and camera sensitivity is not low enough. Then adjust focusing in the Manual mode.

●Auto focusing is sometimes not possible with images that are output to a TV or a personal computer monitor. Then adjust focusing in the Manual mode.

●Focusing to 0.4 inch in the macro mode is possible up to about 3.5 x zoom. Focusing at a higher magnification will be possible only if the distance to the object is longer than 3ft.

● AF Detection Area

Center:

Set a focus detection area in the center of the screen.

All:

Set the focus detection area onto the entire screen. Choose

 

this oprion if focusing is difficult

Introduction

and

Viewing

Operation

Listening

 

・

Recording

Set up

Others

66

67

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Model IK-WB21A Fccus Information Tested To Comply With FCC Standards IntroductionTerms and Trademarks For Home or Office USETable of Contents Recording Images on FTP Server ･ Recording by alarmSetting ･ Scheduled RecordingImportant Safeguards Important Safeguards AC adaptor Precautions for UseSpecifications SD Memory CardFeatures of the Camera Overview of the Network CameraRemove the terminal cover Installing the CameraNames of Camera Parts Connect the AC adapter cable and LAN cable to the cameraWhen installing on ceiling AC adapter cable LAN cableMount the camera on the ceiling attachment Install the cover for mounting on a ceilingRemoving the camera from the ceiling attachment Connecting the Power Cord Turning on the PowerItems needed for network camera monitoring system IP AddressTest the camera connection using ping Connection ConfigurationSet the IP address of the personal computer Click the camera you want to login from the list of cameras Click the Administrator button or the User buttonAdministrator Log-in and User Log-in OperationSetup Screen Administrator Log-in Screen and User Log-in ScreenViewing images Browser setting when proxy server is usedViewing and listening Log-in the cameraMoving the screen center AudioCamera image screen Number and Item DescriptionPreset button. The preset control panel will ControllerPresetting of Camera Position by Administrator Configuring a Preset Selecting a PresetAssign the camera position in the Preset list Preset Name Settings Setup Preset ItemsPreset Position Settings Playing Recorded Alarm Images Playing Recorded Normal ImagesClick Audio in the sub menu Click Camera Settings on the Admin. menu. ThenAudio Out Camera Image screen and set to displayAbout Recording Images Record setting Insert SD memory card to the cameraClick Camera Settings on the Admin. Menu Click Recording in the sub menuClick the Save button under the items Configure each setting itemsClick Camera Settings in the Admin. Menu Deleting Record FileRecording Images on FTP Server Record settingClick the Save button to save settings Click FTP Recording in the sub menuScheduled Recording Transfer Image SizeFTP Server Usage Displayed if Scheduled Recording is chosen as an FTPEX/MD SD card back up Images Jpeg files can be recorded in a personal computer ･ The setup screen for Jpeg Local Saving will appearFile Transfer Order Scheduled Recording ･ Jpeg file will appear on the personal computerClick an item in the sub menu desired to set Setting･ The setup screen for Wave Local Saving will appear Sound can be recorded in a personal computer wav fileCamera/Basic Settings Click 1. General in the sub menuOperating color Overview Characteristics Remarks CameraTemperature AutomaticallyMiddle LOWHigh Setup 3 Item setting Camera/Alarm SettingsClick Camera Settings on the Administrator Setup MenuClick 5. E-mail in the sub menu Camera/E-mail SettingsOFF Operation Introduction Camera/Audio Settings Click 6. Audio in the sub menuPAN/TILT Basic Settings Click PAN/TILT Settings in the Admin. MenuClick 2. Preset in the sub menu PAN/TILT Preset Settings･ a setup screen of PAN/TILT Preset Settings will appear PAN/TILT Operation Range Click PAN/TILT Settings in the Administrator Setup menuPAN/TILT Auto Patrol Click 3. Auto Patrol in the sub menu･ The sub menu for Network Settings will appear Network Basic SettingsClick Network Settings in the Admin. Menu ･ a setup screen of Network Basic Settings will appearClick 2. Ddns in the sub menu Network/DDNS SettingsNetwork / FTP Server Settings Click 3. FTP Server in the sub menu･ The sub menu for multi screen display setting will appear Click Multi Screen Display in the Admin. MenuClick 1. Adding and Removing Cameras in the sub menu Administrator log-in name and password can be set Click Admin. Function in the Admin. MenuClick 1. Changing ID/Password in the sub menu ･ The sub menu for administrator functions will appearClick 2. User Operation Restriction in the sub menu Click Admin. Functions in the Admin. Menu･ The sub menu for administrator function will appear Click 3. Date and Time in the sub menuSelect the file for the latest firmware saved in First step Click 4. FW Update in the sub menuClick the Browse... button Click the Upload button in the screen for StepReset all set values to factory defaults Click Configuration Information in the sub menuSelect a saved setup file Network Camera RebootingLooking up the log or setup items Alarm TerminalsClick Log Management in the Admin. Menu Click 1. Browse and Delete in the sub menuGlossary Index Specifications of Alarm SignalsExample Circuit Connection Jpeg LANFTP LiveLog Display Output message Message109 Before Calling Service Personnel Before Calling Service Personnel... 114 116 117 Specifications OthersAppearance Diagram Installed on desk Unit mm inches Installed on ceilingVersion 2, June GNU General Public LicensePreamble 125 No Warranty END of Terms and ConditionsToshiba America Information SYSTEMS. INC
Top Page Image Contents