and Operation
Introduction
Viewing ・ Listening
Recording
Set up
Others
PAN/TILT Preset Settings
Name assignment, position assignment, moving, deletion and other functions related to PAN and TILT can be set.
1 Click "PAN/TILT Settings" in the Admin. Menu.
･The sub menu for PAN/TILT Settings will appear.
2 Click "2. Preset" in the sub menu.
･A setup screen of PAN/TILT - Preset Settings will appear.
3 Configure each setting items.
･Click the Save button to save settings.
･The settings will not be reflected unless the Save button is clicked.
●Preset name settings
1) Choosing Preset Number
Choose a number during name assignment, position assignment, mov- ing and deletion.
Numbers 1 to 64 can be choosen.
2)Position Name
Name the chosen Preset Number. Click the Clear button if incorrect name is entered.
･Click the "Save" button under items to reflect the foregoing setting.
･Clicking the Reset button resets to the setting last saved.
･Clicking the Default button resets values to factory default.
● Preset position settings
1)If you would like to assign chosen "Preset Number" and "Position Name" to current position, click "Set" button.
If you would like camera to move to different postion, use the controller window.
2)Click "Move" button if you would like camera to move to selected "Preset Number" above.
3)current position and name of selected "preset Number". position and name of all "Preset Number".
･Click each button on the right to reflect the foregoing settings.
NOTE
●Preset Name must have 12 characters or less in length.
●You cannot use these characters: ' "
Introduction | |
and | Viewing |
Operation | Listening |
| ・ |
Recording | |
Set up
Others
82 | 83 |