Toshiba IK-WB21A manual PAN/TILT Basic Settings, Click PAN/TILT Settings in the Admin. Menu

Page 41

and Operation

Introduction

Viewing ・ Listening

Recording

Set up

Others

PAN/TILT Basic Settings

Basic settings for PAN and TILT.

1 Click "PAN/TILT Settings" in the Admin. Menu.

･The sub menu for PAN/TILT Settings will appear.

2 Click "1. General" in the sub menu.

･A setup screen of "PAN/TILT - Basic Settings will appear.

3 Configure each setting items.

･Click the Save button to save settings.

･The settings will not be reflected unless the Save button is clicked.

●Function Settings

1) Set a "Scan Speed."

Fast

Slow

2)Set "Power on Default Position"

This function designates where camera moves when camera is turned on.

Center:	Moves to positions of 0｡ for PAN and 0｡ for TILT.
Home:	Moves to Preset Number 1.
Scan:	Starts auto panning.
Auto Patrol:	Starts auto patrol.

3)Set "Freeze Frame."

ON: Under "Auto Patrol", images will not be shawn while camera moves from Preset Number to next Perset Number.

OFF: No "Freeze Frame".

●Association to Alarm

1) Set "Alarm Association."

OFF:	Does nothing. "Alarm Association Type" or "Preset Num-
	ber" cannot be set.
Preset:	Performs preset moving when an alarm occurs.
Auto patrol:	Starts auto patrol when an alarm occurs.

2) Set "Alarm Association Type."

Alarm In: "Alarm In" will activate "Association to Alarm".

Motion Detection: "Motion Detection" will activate "Association to Alarm".

3)Set when "Alarm Association" is set to "Preset." Preset Number: Choose preset Number.

Resume to Previous Position:Camera moves back to position before "Assciation to Alarm" ocured.

Enable: 10, 30 and 60 seconds

Disable: Stays in the position moved to "Associa- tion to Alarm."

Introduction
and	Viewing
Operation	Listening
	・
Recording

Set up

Others

80

81

Image 41

Contents Model IK-WB21A Terms and Trademarks IntroductionFccus Information Tested To Comply With FCC Standards For Home or Office USETable of Contents Setting ･ Recording by alarmRecording Images on FTP Server ･ Scheduled RecordingImportant Safeguards Important Safeguards Specifications Precautions for UseAC adaptor SD Memory CardOverview of the Network Camera Features of the CameraNames of Camera Parts Installing the CameraRemove the terminal cover Connect the AC adapter cable and LAN cable to the cameraAC adapter cable LAN cable When installing on ceilingRemoving the camera from the ceiling attachment Install the cover for mounting on a ceilingMount the camera on the ceiling attachment Turning on the Power Connecting the Power CordIP Address Items needed for network camera monitoring systemSet the IP address of the personal computer Connection ConfigurationTest the camera connection using ping Click the Administrator button or the User button Click the camera you want to login from the list of camerasOperation Administrator Log-in and User Log-inAdministrator Log-in Screen and User Log-in Screen Setup ScreenViewing and listening Browser setting when proxy server is usedViewing images Log-in the cameraCamera image screen AudioMoving the screen center Number and Item DescriptionController Preset button. The preset control panel willPresetting of Camera Position by Administrator Assign the camera position in the Preset list Selecting a PresetConfiguring a Preset Preset Position Settings Setup Preset ItemsPreset Name Settings Playing Recorded Normal Images Playing Recorded Alarm ImagesAudio Out Click Camera Settings on the Admin. menu. ThenClick Audio in the sub menu Camera Image screen and set to displayClick Camera Settings on the Admin. Menu Record setting Insert SD memory card to the cameraAbout Recording Images Click Recording in the sub menuClick Camera Settings in the Admin. Menu Configure each setting itemsClick the Save button under the items Deleting Record FileClick the Save button to save settings Record settingRecording Images on FTP Server Click FTP Recording in the sub menuFTP Server Usage Transfer Image SizeScheduled Recording Displayed if Scheduled Recording is chosen as an FTPEX/MD SD card back up File Transfer Order Scheduled Recording ･ The setup screen for Jpeg Local Saving will appearImages Jpeg files can be recorded in a personal computer ･ Jpeg file will appear on the personal computer･ The setup screen for Wave Local Saving will appear SettingClick an item in the sub menu desired to set Sound can be recorded in a personal computer wav fileClick 1. General in the sub menu Camera/Basic SettingsTemperature Overview Characteristics Remarks CameraOperating color AutomaticallyHigh LOWMiddle Click Camera Settings on the Administrator Setup Camera/Alarm SettingsSetup 3 Item setting MenuOFF Camera/E-mail SettingsClick 5. E-mail in the sub menu Operation Introduction Click 6. Audio in the sub menu Camera/Audio SettingsClick PAN/TILT Settings in the Admin. Menu PAN/TILT Basic Settings･ a setup screen of PAN/TILT Preset Settings will appear PAN/TILT Preset SettingsClick 2. Preset in the sub menu PAN/TILT Auto Patrol Click PAN/TILT Settings in the Administrator Setup menuPAN/TILT Operation Range Click 3. Auto Patrol in the sub menuClick Network Settings in the Admin. Menu Network Basic Settings･ The sub menu for Network Settings will appear ･ a setup screen of Network Basic Settings will appearNetwork / FTP Server Settings Network/DDNS SettingsClick 2. Ddns in the sub menu Click 3. FTP Server in the sub menuClick 1. Adding and Removing Cameras in the sub menu Click Multi Screen Display in the Admin. Menu･ The sub menu for multi screen display setting will appear Click 1. Changing ID/Password in the sub menu Click Admin. Function in the Admin. MenuAdministrator log-in name and password can be set ･ The sub menu for administrator functions will appear･ The sub menu for administrator function will appear Click Admin. Functions in the Admin. MenuClick 2. User Operation Restriction in the sub menu Click 3. Date and Time in the sub menuClick the Browse... button Click 4. FW Update in the sub menuSelect the file for the latest firmware saved in First step Click the Upload button in the screen for StepSelect a saved setup file Click Configuration Information in the sub menuReset all set values to factory defaults Network Camera RebootingClick Log Management in the Admin. Menu Alarm TerminalsLooking up the log or setup items Click 1. Browse and Delete in the sub menuExample Circuit Connection Specifications of Alarm SignalsGlossary Index FTP LANJpeg LiveOutput message Message Log Display109 Before Calling Service Personnel Before Calling Service Personnel... 114 116 117 Others SpecificationsInstalled on desk Unit mm inches Installed on ceiling Appearance DiagramPreamble GNU General Public LicenseVersion 2, June 125 END of Terms and Conditions No WarrantyToshiba America Information SYSTEMS. INC