Toshiba IK-WB21A manual Important Safeguards

Page 6

and Operation

Introduction

Viewing ・ Listening

Recording

Set up

Others

IMPORTANT SAFEGUARDS (Cont.)

The CAUTION label, shown on the above part, is attached on the camera.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING:

TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN

OR MOISTURE.

FIELD INSTALLATION:

"THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE PERSON AND SHOULD CONFORM TO ALL LOCAL CODES ."

NOTES ON USE AND INSTALLATION

･Do not aim the camera at the sun

Do not aim the camera at the sun or point it at sun even if you are not shooting.

･Do not shoot intense light

Intense light such as a spotlight may cause a bloom or smear. A vertical stripe may appear on the screen. However, this is not a malfunction.

･Treat the camera with care

Do not drop the camera or subject it to strong shock or vibration. Otherwise, the camera may malfunction.

･Never touch internal parts

Do not touch the internal parts of the camera other than the parts specified. Otherwise, the camera may malfunction.

･Install the camera where no video noise appears

If cables are wired near electric lighting wires or a TV set, noise may appear in images. In this event, relocate cables or reinstall equipment.

･Check the ambient temperature and humidity

Avoid using the camera where the temperature is hotter or colder than specified. Otherwise, the quality of images may deteriorate or internal parts may be affected. Special care is required to use the camera at high temperature and humidity.

･Should you notice any trouble

If any trouble occurs while you are using the camera, turn off the power and contact your dealer. Continued use in this state might cause fire or electric shock. For details on repair, consult the place of purchase, or please contact the technical support number.

Introduction
and	Viewing
Operation	Listening
	・
Recording

Set up

Others

10

11

Image 6

Contents Model IK-WB21A Fccus Information Tested To Comply With FCC Standards IntroductionTerms and Trademarks For Home or Office USETable of Contents Recording Images on FTP Server ･ Recording by alarmSetting ･ Scheduled RecordingImportant Safeguards Important Safeguards AC adaptor Precautions for UseSpecifications SD Memory CardFeatures of the Camera Overview of the Network CameraRemove the terminal cover Installing the CameraNames of Camera Parts Connect the AC adapter cable and LAN cable to the cameraWhen installing on ceiling AC adapter cable LAN cableInstall the cover for mounting on a ceiling Mount the camera on the ceiling attachmentRemoving the camera from the ceiling attachment Connecting the Power Cord Turning on the PowerItems needed for network camera monitoring system IP AddressConnection Configuration Test the camera connection using pingSet the IP address of the personal computer Click the camera you want to login from the list of cameras Click the Administrator button or the User buttonAdministrator Log-in and User Log-in OperationSetup Screen Administrator Log-in Screen and User Log-in ScreenViewing images Browser setting when proxy server is usedViewing and listening Log-in the cameraMoving the screen center AudioCamera image screen Number and Item DescriptionPreset button. The preset control panel will ControllerPresetting of Camera Position by Administrator Selecting a Preset Configuring a PresetAssign the camera position in the Preset list Setup Preset Items Preset Name SettingsPreset Position Settings Playing Recorded Alarm Images Playing Recorded Normal ImagesClick Audio in the sub menu Click Camera Settings on the Admin. menu. ThenAudio Out Camera Image screen and set to displayAbout Recording Images Record setting Insert SD memory card to the cameraClick Camera Settings on the Admin. Menu Click Recording in the sub menuClick the Save button under the items Configure each setting itemsClick Camera Settings in the Admin. Menu Deleting Record FileRecording Images on FTP Server Record settingClick the Save button to save settings Click FTP Recording in the sub menuScheduled Recording Transfer Image SizeFTP Server Usage Displayed if Scheduled Recording is chosen as an FTPEX/MD SD card back up Images Jpeg files can be recorded in a personal computer ･ The setup screen for Jpeg Local Saving will appearFile Transfer Order Scheduled Recording ･ Jpeg file will appear on the personal computerClick an item in the sub menu desired to set Setting･ The setup screen for Wave Local Saving will appear Sound can be recorded in a personal computer wav fileCamera/Basic Settings Click 1. General in the sub menuOperating color Overview Characteristics Remarks CameraTemperature AutomaticallyLOW MiddleHigh Setup 3 Item setting Camera/Alarm SettingsClick Camera Settings on the Administrator Setup MenuCamera/E-mail Settings Click 5. E-mail in the sub menuOFF Operation Introduction Camera/Audio Settings Click 6. Audio in the sub menuPAN/TILT Basic Settings Click PAN/TILT Settings in the Admin. MenuPAN/TILT Preset Settings Click 2. Preset in the sub menu･ a setup screen of PAN/TILT Preset Settings will appear PAN/TILT Operation Range Click PAN/TILT Settings in the Administrator Setup menuPAN/TILT Auto Patrol Click 3. Auto Patrol in the sub menu･ The sub menu for Network Settings will appear Network Basic SettingsClick Network Settings in the Admin. Menu ･ a setup screen of Network Basic Settings will appearClick 2. Ddns in the sub menu Network/DDNS SettingsNetwork / FTP Server Settings Click 3. FTP Server in the sub menuClick Multi Screen Display in the Admin. Menu ･ The sub menu for multi screen display setting will appearClick 1. Adding and Removing Cameras in the sub menu Administrator log-in name and password can be set Click Admin. Function in the Admin. MenuClick 1. Changing ID/Password in the sub menu ･ The sub menu for administrator functions will appearClick 2. User Operation Restriction in the sub menu Click Admin. Functions in the Admin. Menu･ The sub menu for administrator function will appear Click 3. Date and Time in the sub menuSelect the file for the latest firmware saved in First step Click 4. FW Update in the sub menuClick the Browse... button Click the Upload button in the screen for StepReset all set values to factory defaults Click Configuration Information in the sub menuSelect a saved setup file Network Camera RebootingLooking up the log or setup items Alarm TerminalsClick Log Management in the Admin. Menu Click 1. Browse and Delete in the sub menuSpecifications of Alarm Signals Glossary IndexExample Circuit Connection Jpeg LANFTP LiveLog Display Output message Message109 Before Calling Service Personnel Before Calling Service Personnel... 114 116 117 Specifications OthersAppearance Diagram Installed on desk Unit mm inches Installed on ceilingGNU General Public License Version 2, JunePreamble 125 No Warranty END of Terms and ConditionsToshiba America Information SYSTEMS. INC