Toshiba IK-WB21A manual About Recording Images, Record setting Insert SD memory card to the camera

Page 26

and Operation

Introduction

Viewing ・ Listening

Recording

Set up

Others

About Recording Images

Network camera can record images according to your need. Recordable media and its recordable contents are as follows.

Recordable Media�

Recordable Contents�

 

�

 

 

�

 

SD Memory Card �

・Alarm Recording images configured in "Alarm

 

�

Recording" settings (→page 53).�

 

�

・Continuous Recording images configured in

 

�

"Continuous Recording" settings (→page 53).�

�

�

 

FTP Server�

･ Recorded images by schedule�

�

･ Data of "When Alarm goes off"�

�

･ Recorded images by external control�

�

･ One image (JPEG) recorded by operating the�

PC

button. (See page 63)�

 

 

･ Image (JPEG) recorded by operating the�

 

button. (See page 63)�

 

･ Voice (WAVE) recorded by operating the�

 

button. (See page 64)

 

 

 

NOTE

●The SD memory card cannot perform Alarm recording, Continuous Recording, External Control recording and playing simultaneously.The priority is given in the order of external alarm recording - external control recording - recording activated by motion detection - playing - Continuous Recording. Images are not recorded during replay.

●A picture displayed by the button (one-shot button) should be saved using "Save Picture As..." with a mouse right button. However, depending on installation (Ceiling/Desktop) and its settings, the picture may be carrying out vertical reversal.

Recording Images in SD Memory Card

Images during "Alarm In", images during "Motion Detection", images during "Ext. Control In" and images of "Continuous Recording" can be stored in an SD memory card inserted in the network camera.

When recording alarm images, perform "Alarm Settings" first as explained on page 73 and set records in the following sequence.

Record setting

1 Insert SD memory card to the camera.

･Remove the SD card cover and insert an SD memory card as explained on page 16. Then mount the SD card cover.

･Click "SD In Out Wizard" and check "Mounting SD memory card" in the displayed SD Memory Card In and Out screen. Then click the Execute button.

･Clicking the Format button on the SD Memory Card In/Out screen will format the SD memory card.

Important

●Be certain to check "Removing SD memory card" in the SD Memory Card In and Out screen when removing the SD card. Then click the Execute button. Removing SD Card without executing "Remove SD memory card" may destroy data.

2 Click "Camera Settings" on the Admin. Menu.

･A sub menu for camera setup will appear.

･Unless administrator log-in is made, the Administrator Setup Menu will not be displayed. Perform administrator log-in.

3 Click "Recording" in the sub menu

･The Camera/Recording screen will appear.

Introduction

and

Viewing

Operation

Listening

 

・

Recording

Set up

Others

50

51

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Model IK-WB21A Fccus Information Tested To Comply With FCC Standards IntroductionTerms and Trademarks For Home or Office USETable of Contents Recording Images on FTP Server ･ Recording by alarmSetting ･ Scheduled RecordingImportant Safeguards Important Safeguards AC adaptor Precautions for UseSpecifications SD Memory CardFeatures of the Camera Overview of the Network CameraRemove the terminal cover Installing the CameraNames of Camera Parts Connect the AC adapter cable and LAN cable to the cameraWhen installing on ceiling AC adapter cable LAN cableRemoving the camera from the ceiling attachment Install the cover for mounting on a ceilingMount the camera on the ceiling attachment Connecting the Power Cord Turning on the PowerItems needed for network camera monitoring system IP AddressSet the IP address of the personal computer Connection ConfigurationTest the camera connection using ping Click the camera you want to login from the list of cameras Click the Administrator button or the User buttonAdministrator Log-in and User Log-in OperationSetup Screen Administrator Log-in Screen and User Log-in ScreenViewing images Browser setting when proxy server is usedViewing and listening Log-in the cameraMoving the screen center AudioCamera image screen Number and Item DescriptionPreset button. The preset control panel will ControllerPresetting of Camera Position by Administrator Assign the camera position in the Preset list Selecting a PresetConfiguring a Preset Preset Position Settings Setup Preset ItemsPreset Name Settings Playing Recorded Alarm Images Playing Recorded Normal ImagesClick Audio in the sub menu Click Camera Settings on the Admin. menu. ThenAudio Out Camera Image screen and set to displayAbout Recording Images Record setting Insert SD memory card to the cameraClick Camera Settings on the Admin. Menu Click Recording in the sub menuClick the Save button under the items Configure each setting itemsClick Camera Settings in the Admin. Menu Deleting Record FileRecording Images on FTP Server Record settingClick the Save button to save settings Click FTP Recording in the sub menuScheduled Recording Transfer Image SizeFTP Server Usage Displayed if Scheduled Recording is chosen as an FTPEX/MD SD card back up Images Jpeg files can be recorded in a personal computer ･ The setup screen for Jpeg Local Saving will appearFile Transfer Order Scheduled Recording ･ Jpeg file will appear on the personal computerClick an item in the sub menu desired to set Setting･ The setup screen for Wave Local Saving will appear Sound can be recorded in a personal computer wav fileCamera/Basic Settings Click 1. General in the sub menuOperating color Overview Characteristics Remarks CameraTemperature AutomaticallyHigh LOWMiddle Setup 3 Item setting Camera/Alarm SettingsClick Camera Settings on the Administrator Setup MenuOFF Camera/E-mail SettingsClick 5. E-mail in the sub menu Operation Introduction Camera/Audio Settings Click 6. Audio in the sub menuPAN/TILT Basic Settings Click PAN/TILT Settings in the Admin. Menu･ a setup screen of PAN/TILT Preset Settings will appear PAN/TILT Preset SettingsClick 2. Preset in the sub menu PAN/TILT Operation Range Click PAN/TILT Settings in the Administrator Setup menuPAN/TILT Auto Patrol Click 3. Auto Patrol in the sub menu･ The sub menu for Network Settings will appear Network Basic SettingsClick Network Settings in the Admin. Menu ･ a setup screen of Network Basic Settings will appearClick 2. Ddns in the sub menu Network/DDNS SettingsNetwork / FTP Server Settings Click 3. FTP Server in the sub menuClick 1. Adding and Removing Cameras in the sub menu Click Multi Screen Display in the Admin. Menu･ The sub menu for multi screen display setting will appear Administrator log-in name and password can be set Click Admin. Function in the Admin. MenuClick 1. Changing ID/Password in the sub menu ･ The sub menu for administrator functions will appearClick 2. User Operation Restriction in the sub menu Click Admin. Functions in the Admin. Menu･ The sub menu for administrator function will appear Click 3. Date and Time in the sub menuSelect the file for the latest firmware saved in First step Click 4. FW Update in the sub menuClick the Browse... button Click the Upload button in the screen for StepReset all set values to factory defaults Click Configuration Information in the sub menuSelect a saved setup file Network Camera RebootingLooking up the log or setup items Alarm TerminalsClick Log Management in the Admin. Menu Click 1. Browse and Delete in the sub menuExample Circuit Connection Specifications of Alarm SignalsGlossary Index Jpeg LANFTP LiveLog Display Output message Message109 Before Calling Service Personnel Before Calling Service Personnel... 114 116 117 Specifications OthersAppearance Diagram Installed on desk Unit mm inches Installed on ceilingPreamble GNU General Public LicenseVersion 2, June 125 No Warranty END of Terms and ConditionsToshiba America Information SYSTEMS. INC
Top Page Image Contents