Toshiba IK-WB21A manual Presetting of Camera Position by Administrator

and Operation

Introduction

Viewing ・ Listening

Recording

Set up

Others

Viewing and listening (Cont.)

Number and Item					Description
⑦�			The Auto Patrol feature moves the lens automatically
�			to all the configured preset positions in order. Clicking
�			the		button starts Auto Patrol. Clicking one of�
�					�
�			�	buttons stops the action.
�
8 �			The Scan feature automatically moves (swivels) the
�			lens horizontally back and forth once. Clicking the			�
�					�
				button starts Scan. Clicking one of �
�					�
�			�	buttons stops the action.
	�
9			"Continuous Recording" button. The list of
�			"Continuous Recording" will appear.�
10		�	"EXT. Control In" button. The list of "EXT. Control In"
�			will appear.

NOTE

●Setting the Manual mode adjusts brightness only by the lens aperture.

●Zooming, PAN/TILT operation or moving to the screen center during manual focus adjustment automatically sets the Auto Focus mode.

●The value immediately before operation of the auto panning function will be maintained as the focus value during operation of the auto panning function. The Auto Focus mode will set after operation completes.

●A picture displayed by the button (one-shot button) should be saved using "Save Picture As..." with a mouse right button. However, depending on installation (Ceiling/Desktop) and its settings, the picture may be carrying out vertical reversal.

Presetting of Camera Position by Administrator

The presets function enables you to assign up to ten different positions and

names for the camera. Clicking the button on the basic administrator controller opens the preset controller.

Introduction
and	Viewing
Operation	Listening
	・
Recording

Set up

Others

40 41