Toshiba IK-WB21A manual Network/DDNS Settings, Network / FTP Server Settings

Page 45

and Operation

Introduction

Viewing ・ Listening

Recording

Set up

Others

Network/DDNS Settings

DDNS can be used. Establish DDNS server connection.

1 Click "Network Settings" in the Admin. Menu.

･The sub menu for network setting will appear.

2 Click "2. DDNS" in the sub menu.

･A setup screen of "Network / DDNS Settings" will appear.

3 Configure each setting items.

1)Set ON or OFF for "DDNS use."

ON: Use DDNS.

OFF: Do not use DDNS.

2)When using DDNS, be sure to register with DDNS provider. Enter "DDNS Server", "User ID", "Password" and "Password (confirm)".

･Click the Save button to save settings.

･The settings will not be reflected unless the Save button is clicked.

NOTE

●Enter only 6 to 12 lower-case alphanumeric characters as an User ID.

●Maximum of 16 characters can be used in "User ID," "Password" and "Password (confirm)"::

. (dot), - (hyphen), @, 0 - 9, a to z and A to Z

●You cannot use these characters: ' "

●Be sure that the DDNS server information is entered correctly. (See "Network/ Basic Setting" on page 86)

Network / FTP Server Settings

The network camera can be set as an FTP server for connection from a personal computer or other terminal.

1 Click "Network Settings" in the Admin. Menu.

･The sub menu for network setting will appear.

2 Click "3. FTP Server" in the sub menu.

･A setup screen of "Network / FTP Server Settings" will appear.

3 Configure each setting items.

1)Set ON or OFF for "FTP function." ON: Used as an FTP server. OFF: Not used as an FTP server.

2)When using as an "FTP server," enter the user name in "Login ID" and the password in "Password." Enter the same password in "Password (confirm)". Choose the maximum number of connections in the pull-down menu in "Maximum number of simultaneous connections."

･Click the Save button to save the settings.

･The settings will not be reflected unless the Save button is clicked.

NOTE

●Maximum of 16 following characters can be used in "Login ID", "Password" and "Password (confirm)":

. (dot), - (hyphen), @, 0 - 9, a to z and A to Z

●Only the contents of the SD memory card can be viewed when the network camera is logged in by FTP. Therefore, the network camera cannot be logged in by FTP even though the FTP function is set to ON in case an SD memory card is not inserted.

Introduction
and	Viewing
Operation	Listening
	・
Recording

Set up

Others

88

89

Image 45

Contents Model IK-WB21A Terms and Trademarks IntroductionFccus Information Tested To Comply With FCC Standards For Home or Office USETable of Contents Setting ･ Recording by alarmRecording Images on FTP Server ･ Scheduled RecordingImportant Safeguards Important Safeguards Specifications Precautions for UseAC adaptor SD Memory CardOverview of the Network Camera Features of the CameraNames of Camera Parts Installing the CameraRemove the terminal cover Connect the AC adapter cable and LAN cable to the cameraAC adapter cable LAN cable When installing on ceilingInstall the cover for mounting on a ceiling Mount the camera on the ceiling attachmentRemoving the camera from the ceiling attachment Turning on the Power Connecting the Power CordIP Address Items needed for network camera monitoring systemConnection Configuration Test the camera connection using pingSet the IP address of the personal computer Click the Administrator button or the User button Click the camera you want to login from the list of camerasOperation Administrator Log-in and User Log-inAdministrator Log-in Screen and User Log-in Screen Setup ScreenViewing and listening Browser setting when proxy server is usedViewing images Log-in the cameraCamera image screen AudioMoving the screen center Number and Item DescriptionController Preset button. The preset control panel willPresetting of Camera Position by Administrator Selecting a Preset Configuring a PresetAssign the camera position in the Preset list Setup Preset Items Preset Name SettingsPreset Position Settings Playing Recorded Normal Images Playing Recorded Alarm ImagesAudio Out Click Camera Settings on the Admin. menu. ThenClick Audio in the sub menu Camera Image screen and set to displayClick Camera Settings on the Admin. Menu Record setting Insert SD memory card to the cameraAbout Recording Images Click Recording in the sub menuClick Camera Settings in the Admin. Menu Configure each setting itemsClick the Save button under the items Deleting Record FileClick the Save button to save settings Record settingRecording Images on FTP Server Click FTP Recording in the sub menuFTP Server Usage Transfer Image SizeScheduled Recording Displayed if Scheduled Recording is chosen as an FTPEX/MD SD card back up File Transfer Order Scheduled Recording ･ The setup screen for Jpeg Local Saving will appearImages Jpeg files can be recorded in a personal computer ･ Jpeg file will appear on the personal computer･ The setup screen for Wave Local Saving will appear SettingClick an item in the sub menu desired to set Sound can be recorded in a personal computer wav fileClick 1. General in the sub menu Camera/Basic SettingsTemperature Overview Characteristics Remarks CameraOperating color AutomaticallyLOW MiddleHigh Click Camera Settings on the Administrator Setup Camera/Alarm SettingsSetup 3 Item setting MenuCamera/E-mail Settings Click 5. E-mail in the sub menuOFF Operation Introduction Click 6. Audio in the sub menu Camera/Audio SettingsClick PAN/TILT Settings in the Admin. Menu PAN/TILT Basic SettingsPAN/TILT Preset Settings Click 2. Preset in the sub menu･ a setup screen of PAN/TILT Preset Settings will appear PAN/TILT Auto Patrol Click PAN/TILT Settings in the Administrator Setup menuPAN/TILT Operation Range Click 3. Auto Patrol in the sub menuClick Network Settings in the Admin. Menu Network Basic Settings･ The sub menu for Network Settings will appear ･ a setup screen of Network Basic Settings will appearNetwork / FTP Server Settings Network/DDNS SettingsClick 2. Ddns in the sub menu Click 3. FTP Server in the sub menuClick Multi Screen Display in the Admin. Menu ･ The sub menu for multi screen display setting will appearClick 1. Adding and Removing Cameras in the sub menu Click 1. Changing ID/Password in the sub menu Click Admin. Function in the Admin. MenuAdministrator log-in name and password can be set ･ The sub menu for administrator functions will appear･ The sub menu for administrator function will appear Click Admin. Functions in the Admin. MenuClick 2. User Operation Restriction in the sub menu Click 3. Date and Time in the sub menuClick the Browse... button Click 4. FW Update in the sub menuSelect the file for the latest firmware saved in First step Click the Upload button in the screen for StepSelect a saved setup file Click Configuration Information in the sub menuReset all set values to factory defaults Network Camera RebootingClick Log Management in the Admin. Menu Alarm TerminalsLooking up the log or setup items Click 1. Browse and Delete in the sub menuSpecifications of Alarm Signals Glossary IndexExample Circuit Connection FTP LANJpeg LiveOutput message Message Log Display109 Before Calling Service Personnel Before Calling Service Personnel... 114 116 117 Others SpecificationsInstalled on desk Unit mm inches Installed on ceiling Appearance DiagramGNU General Public License Version 2, JunePreamble 125 END of Terms and Conditions No WarrantyToshiba America Information SYSTEMS. INC