JVC VN-C205 manual Starting Up V.Networks Controller

Settings (Step 3 Setting Using the V.Networks Controller)

3-1 Starting Up V.Networks Controller

The installed "V.Networks Controller" can be used to monitor camera images.

In addition, recording/playback operations and setting of frame rate for camera images are also possible.

1.Select [Start] † [Programs] † [V. NETWORKS] † [V.Networks Controller] to start up the "V.Networks Controller".

1 Select the camera to connect to from the pull-down menu for the camera.

3-2 Features that Allow Setting Using the V.Networks Controller

The V.Networks Controller can be used to perform settings for image size and alarm.

12 3 4

2 Live images from the camera will be displayed.

Notes

●Enter the correct password if a password has been set.

●This controller can be connected to VN-C1, VN-C2, VN-C3, VN-C30 (JPEG only), VN-A1, VN-C10 (JPEG and MPEG), VN-C655 and VN-C625 as well VN-C205.

1File
New	: Creates a new file if the camera
Delete	is connected for the first time.
	: Deletes a file.

Motion Detection Standby

	: Select the camera for which
	the Motion Detection Standby
	function is to be enabled.
Exit	: Exits the controller.

2View

Image Size : Sets the image display size. JPEG : 640 x 480

320 x 240

Upside Down: Displays the image inversely.

Note

The video output is not inverted.

3Setting

Quality	: For setting the compression
	rate. (☞ Page 60)
Frame rate	: For setting the number of
	camera images to send per
	second. (☞ Page 61)
Alarm Reg	: Alarm operation will be
	enabled if this item is
	checked.

Alarm Setting : For setting alarm actions

	for each alarm.
	(☞ Page 62)
Time Stamp	: For setting the date and
	time display of a stored
	file.(☞ Page 64)
Property	: For changing information
	of cameras that are not
	currently connected.
	(☞ Page 65)
4Help
About	: For checking the version of
	the V.Networks Controller.

56 57