JVC VN-C205 manual Setting Using the Web Browser 2. View Setting

Operations (Step 5 Operating Using a Web Browser)

5-4 Setting Using the Web Browser (1. Other Settings) (Continued)

Description of Items in [Other Settings]

	Item	Meaning
! Default Page (Continued)
	Available/Not Available	Set to "Available" when using the default page function and to "Not
		Available" when not in use.
	File Name	Enter the html file name that is to be used as the default page.
@ HTTP Port		To enhance the security level, set the HTTP server port number of VN-
		C205 to a value other than the default value of 80. (Specify any value
		within the range of 1 to 65535, except for 21 and 554.) Upon changing
		the HTTP port number, access the page via the web browser by entering
		http://192.168.0.2:12345/ or http://192.168.0.2:12345/index.html.
		(When the port number is changed to 12345.) If you have lost track of
		the HTTP port number, check using the setup tool supplied.
# NTP Settings		This is used to perform setting for the NTP (Network Time Protocol) server.
	Available/Not Available	Set to "Available" when using the NTP function and to "Not Available"
		when not in use.
	Server IP Address	Enter the IP address of the NTP server.
	Time Zone	The local time will be derived from the Greenwich Time.
	Adjust interval	An accurate time will be acquired from the NTP server according to
		the specified interval to adjust the time to a correct value.

Note

●Password Protection

VN-C205 is equipped with an access protection feature using a password to restrict browsers (users) that are connected. The access protection function is divided into 3 levels according to the authorization levels. Pages that can be accessed (browsed) for each authorization level are as follows. (Refer to Page 73 for the configuration of web pages in VN-C205.)

Authorization Level	Allowed Access
User Level	Still or motion image pages only
Operator Level	Web pages except the Settings page
Administrator Level	All web pages

Cautions

●Unless a correct Administrator level password is entered, password settings cannot be undone or changed. Please make sure that you do not forget the password.

●If passwords are only set for the User and Operator levels and not for the Administrator level, password entry will not be requested.

When the IP address, subnet mask, host name or HTTP port settings are changed, a confirmation screen indicating "Are you sure to reset to enable the changes?" will appear. Upon clicking [OK] on this confirmation screen, VN-C205 will be reset internally and settings such as the IP address will be changed. The IP address before change (factory setting) will be disabled and connection to VN-C205 will be cut off upon the reset operation.

When the web browser is left unoperated for some time, a message will appear indicating that connection cannot be established. This is due to the change in the IP address. (The same message will also appear when the port number is changed.)

78

5-4 Setting Using the Web Browser (2. View Setting)

View Setting window:

http://******/viewconfig-e.html ("******" represents the URL of VN-C205)

				Click	to apply settings and to
				save the set values.
				Click	to apply settings without
				saving the set values. These settings
				will be cleared upon turning off the
				power of VN-C205, and the previous
				settings will be restored.
	Item		Meaning			Initial Value
Resolution		Select either 640 x 480 or 320 x 240 for the image size.				640 x 480
		*Setting to the Fine mode enables display of image details.
		Images of moving objects captured in this mode may be blurred,
		but this is not a malfunction.
Frame Rate		For setting the maximum number of frames per second when send-				15
		ing out images from VN-C205.
		Set value : 30, 15, 10, 8, 6, 5, 4, 3, 2, 1, 1/2, 1/3, 1/5, 1/10,
		1/15, 1/20, 1/30
Distribution Control		For performing settings related to distribution of images.				OFF
	OFF	Distributes an image at a fixed compression level. (Set value: 1 to 7)				2
		The smaller the value, the higher will be the image quality.
	ON	Adjusts the compression level automatically to enable distribution				—
		of images at the specified bit rate. (Set value: 32 kbps to 8 Mbps)

Cautions

●The actual number of frames transmitted and displayed per second are affected by the PC performance, web browser type as well as the LAN environment. When there is a possibility of communication failure with other user operations (particularly in an environment where network traffic is relatively heavy), set [Frame Rate] to a small value.

●Ensure to set [Frame Rate] according to the number of simultaneous access to VN-C205. Display of web pages and move/button operations may not function properly if the processing capacity of the camera is exceeded.

79