JVC VN-C205 manual Record/Stop

Operations (Step 4 Operation Using the V.Networks Controller)

4-1 Features that Allow Operation Using the V.Networks Controller

The "V.Networks Controller" can be used to select a camera as well as record/play back camera images.

(The controller screen is identical to other V.Networks versions, and there are functions that cannot be operated from VN-C205)

4-2 Record/Stop

The "V.Networks Controller" can be used to save camera images to a file.

1.Click the [REC] button.

Connected Camera

(Saved in a folder under this name)

1

6

Recording Format

[REC] Indicator

2. 1.

2 3 4 5

(Motion Image Window)

1CAMERA

Displays the name of the connected camera. You can also select the connected camera

using (pull-down menu).

2PLAY

For selecting and playing back video files saved in 6. Use also this button to make a selection when playing back files recorded during an alarm.

3STOP

Stops recording.

4REC

5 Snap Shot

For registering and saving only 1 frame of the displayed image.

6Size

For reducing the display size of the [V.Networks Controller] screen. (See diagram below)

[REC] Indicator

Starts recording when this is selected. Recorded files are saved under the name as shown in 1. During recording, a [Recording] and [REC] indicator will appear in 1 and on the displayed image respectively.

Reduced Screen

1CAMERA

Enlarge Display Screen

Compression Mode

2.Click the [Stop] button.

Stops recording and the [Recording] and [REC] indicators will disappear.

(Click the [Snap Shot] button to record only 1 frame of the displayed image. (☞ Page 71)

Notes

●Avoid recording continuously for an extended period of time. Attempt to play back files recorded over an extended time may cause playback failure on some PCs due to insufficient memory.

●Do not change the name of the record file. Doing so may cause playback to fail.

66 67