JVC VN-C205 manual Setting PCs IP Address Windows XP, Settings Network Settings, Click

Settings (Step 2 Network Settings)

2-2 Setting PC's IP Address [Windows XP]

Upon installing the camera, set the IP address of the PC that is used to operate this camera.

For Windows XP, set according to the following procedure.

(For Windows 2000, ☞ Page 30)

Note

Under a DHCP environment and when the IP address assigned to V. Networks is already known, it will not be necessary to perform 2-2 "Setting PC's IP Address" as the PC's IP address is automatically acquired from the DHCP server.

1.Click .

•Right-click on [My Network] and select [Properties].

2.Slect the network for which the PC that operates this camera is connected to.

•Right-click to select [Properties].

Ensure that it is selected.

Note

Select "Install (N) ..." if [Client for

Microsoft Networks] or [Internet

Protocol (TCP/IP)] is not displayed.

28

3.Select [Internet Protocol (TCP/IP)] and click [Properties].

1 Select [Internet Protocol (TCP/IP)]. 2 Click [Properties].

4.Select [Use the following IP address], set the [IP address] and [Subnet mask] and

click .

1 Select [Use the following IP address].

2 Set [IP address] to 192.168.0.3.

Notes

• Make sure to note down the original IP address before changing.

• Do not use the same IP address elsewhere within the same network environment.

3 Set Subnet mask to an appropriate value. Ask the network administrator if necessary.

4 Click .

5.Click on the [Local Area Connection Properties] screen.

29