JVC VN-C205 manual Specifications, Others

Page 45

Others

Troubleshooting (Continued)

Specifications

Symptom

Causes/Remedial Actions

 

 

Video images cannot be displayed

Live images may appear in slow motion or loss of frames

smoothly.

may occur when the PC specifications or network

 

bandwidth is inadequate.

 

 

Forgotten the password upon

Repair services will be required to undo the password

enabling the password protection

protection feature. Please consult your dealer for details.

feature.

Please also note that you may be asked to produce

 

identification cards for security reasons.

 

 

Video images are not displayed.

Is the camera connected to a DC 12 V or AC 24 V power

 

supply?

 

Check connection of the input power cable. (Page 22)

 

Is the LAN cable connected?

 

Check connection of the LAN cable. (Page 20)

 

 

Camera Image pickup

device : 1/4-inch type, interline

transfer CCD,

768 (H) x 494 (V)

Sync system : Internal

Scanning

frequencies : 15.734 kHz (Horizontal), 59.95 Hz (Vertical)

White Balance : ATW/Manual (Switchable)

ATW: Color temperature range 2,300 K to 10000 K

Backlight

compensation : ON/OFF (Switchable) Easy Day & Night: ON/OFF (Switchable)

[Video Output]

Color System : NTSC

S/N: 48 dB

(AGC: OFF, Typ.)

Horizontal

resolution : 540 TV lines (Typ.)

Minimum object illumination : (Color mode):

3.0lx (50% output, AGC ON, Wide-end)

1.5lx (25% output, AGC ON, Wide-end)

(Black & White mode):

2.0lx (50% output, AGC ON, Wide-end)

0.9lx (25% output, AGC ON, Wide-end)

Lens

Focal length : 2.6 mm to 6 mm (variable)

Maximum aperture : F1.2 (Wide) to F1.8 (Tele)

Angle of vision

: f = 2.6 mm

 

 

82˚ (H) x 59˚ (V)

 

f = 6 mm

 

 

35˚ (H) x 26˚ (V)

Angle adjustment

 

 

range

: Horizontal

: 120˚

 

Vertical

: +80˚, –50˚

 

Tilt

: ±15˚

LAN Standard : IEEE802.3, IEEE802.3u

Communication

protocol : TCP, UDP, FTP, ICMP, ARP,

DHCP, NTP, HTTP

General

Power supply : AC 24 V ` 50 Hz/60 Hz

DC 12 V }

Power consumption : 0.8 A

Ambient

 

 

temperature : 0˚C to 40˚C

 

Humidity

: 20% to 85% RH (without

 

condensation)

 

Mass

: Approx. 1.0 k˝

 

Accessories

: Read Me First

1

 

CD-ROM

1

 

Warranty Card

1

 

Service Information Card

1

 

Template

1

External Dimensions [Unit: mm (inches)]

φ160 (6-5/16)

134 (5-9/32)

(2 SR52 -

1/16)

φ103.5 (4-3/32)

*Specifications and appearance of this unit and related products are subject to change for product improvement without prior

notice.

88

 

 

 

89

Image 45
Contents VN-C205 VN-C205INSTRUCTIONSInformation for USA Not apply to all appliancesContents Introduction SettingsPreparation Settings OperationCharacteristics Operating PrecautionsIntroduction Operating Environment Name and Function of Parts Latest UpdatesVideo setting switch Connection Examples Preparation ProcedureInstallation Flowchart of installation work for camera Getting StartedAdjustment of the camera’s angle of view PreparationPreparation Connection/Installation Mounting the Camera to the CeilingPreparations  Inserting the CF card Preparations  Connection to Alarm Input/Output TerminalConnect the input power supply cable Connect the alarm terminalConnect the LAN cable Point the camera in the direction you wish to captureAdjusting the iris level Adjusting the focal length When installing the Camera to the electrical boxAdjusting the focus Settings related to videoInstalling the Software Pull out the cables aside and mountWhite-spot correction Settings Network Settings Setting PCs IP Address Windows XPClick Select Internet Protocol TCP/IP and click PropertiesFor Windows 2000, set according to the following procedure Setting PCs IP Address WindowsSelect Settings and click Properties Set IP address toCheck settings This VN-C205U Setup Tool only allows connection of VN-C205For other settings, next Click Start up the V.Networks Controller.Authorization Level Allowed Access Other Settings Using the VN-C205U Setup ToolAll operations using the V.Networks Controller Viewing of motion images onlyOther Settings Using the VN-C205U Setup Tool 2. Multicast Perform area setting This section describes procedures for alarm setting Alarm InputOperation when an alarm input is activated Detect Mode Alarm 1/AlarmAlarm Output Alarm FTPOutput  Alarm Output Function/Set ValueOutput Set Values Output ValueSetting the Advance screen Recording timeRecording files Other Settings Using the VN-C205U Setup Tool 7. FTP Server Other Settings Using the VN-C205U Setup Tool 6. WebStart up the VN-C205U Setup Tool and select FTP Server Displaying still images uploaded to the /user folderError recovery Connection error PasswordTransfer error Alarm FTP Upload SettingStart up the VN-C205U Setup Tool and select Time When NTP is usedStart up the VN-C205U Setup Tool and select Memory Info Normal High SpeedConnect to VN-C205 Starting Up V.Networks Controller Features that Allow Setting Using the V.Networks ControllerSelect View Specify Image Size and Upside Down settings Settings Setting Using the V.Networks ControllerMotion Detection Standby Image Size and InversionImage Quality Setting Operations Setting Using the V.Networks ControllerFrame Rate Alarm Setting Select Setting and Property Perform setting Select Setting and Time Stamp Perform settingWhen alteration is complete, click Time StampRecord/Stop Playback Operations Operation Using the V.Networks ControllerPlay button Click Playback screen is displayedSnapshot Operating Environment Access Authorization LevelSetting Using the Web Browser Operations Operating Using a Web BrowserStarting Up the Web Browser Setting Using the Web Browser 1. Other Settings Setting Using the Web Browser 2. View Setting Click to apply settings and to save the set values Setting Using the Web Browser 3. Alarm Setting Alarm  Alarm OutOperations Setting Using the Web Browser Setting Using the Web Browser 4. FTP SettingViewing Live Images Viewing Still ImagesSymptom Causes/Remedial Actions TroubleshootingImage Link Displaying a still imageOthers Specifications120 Template テンプレート