JVC VN-C205 manual Starting Up the Web Browser, Setting Using the Web Browser

Page 38

Operations (Step 5 Operating Using a Web Browser)

5-3 Starting Up the Web Browser

Specify the default web page address of VN-C205 as the page to view using the web browser. (Upon entering the factory setting of the IP address, the web browser will display the front page of VN-C205.)

Note

You may not be able to specify the IP address directly if a proxy server is set for accessing the Internet. In this case, change the proxy settings to enable direct specification.

1.Start up the web browser.

"http://192.168.0.2/index-e.html"

Note

The terms "Top Page" and "Home Page" are defined as follows in this manual. Top Page : Refers to /index-e.html

Home Page : • Refers to the specified html page when the default page feature is enabled.

/index-e.html will be used when the default page is disabled.

2.The Top page will be displayed.

Still Image of VN-C205

Camera image at the point when browsing starts is displayed.

Link buttons to various web pages. (Click once to jump to these pages.)

Still Image (Page 84)

Live Image (Page 85)

Settings (Page 75)

5-4 Setting Using the Web Browser

Web browsers can be used to set the IP address, image quality or FTP.

1.Display the Top page.

Still Image of VN-C205

Camera image at the point when browsing starts is displayed.

Click .

(Click once to jump to these pages.)

Top Page

2.The [Settings] page will be displayed.

Note

Web browsers do not support the function to invert images.

• View settings (Page 79)

• Alarm settings (Page 80)

• FTP settings (Page 82)

• Other settings (Page 76)

Hyperlink to Home Page

74

 

 

 

75

Image 38
Contents VN-C205INSTRUCTIONS VN-C205Not apply to all appliances Information for USAPreparation Settings SettingsContents Introduction OperationIntroduction CharacteristicsOperating Precautions Latest Updates Operating Environment Name and Function of PartsVideo setting switch Preparation Procedure Connection ExamplesAdjustment of the camera’s angle of view Flowchart of installation work for camera Getting StartedInstallation PreparationPreparations Preparation Connection/InstallationMounting the Camera to the Ceiling Preparations  Connection to Alarm Input/Output Terminal  Inserting the CF cardConnect the LAN cable Connect the alarm terminalConnect the input power supply cable Point the camera in the direction you wish to captureAdjusting the iris level Adjusting the focus When installing the Camera to the electrical boxAdjusting the focal length Settings related to videoWhite-spot correction Installing the SoftwarePull out the cables aside and mount Click Setting PCs IP Address Windows XPSettings Network Settings Select Internet Protocol TCP/IP and click PropertiesSelect Settings and click Properties Setting PCs IP Address WindowsFor Windows 2000, set according to the following procedure Set IP address toFor other settings, next This VN-C205U Setup Tool only allows connection of VN-C205Check settings Click Start up the V.Networks Controller.All operations using the V.Networks Controller Other Settings Using the VN-C205U Setup ToolAuthorization Level Allowed Access Viewing of motion images onlyOther Settings Using the VN-C205U Setup Tool 2. Multicast Perform area setting Operation when an alarm input is activated This section describes procedures for alarm settingAlarm Input Alarm Output Alarm 1/AlarmDetect Mode Alarm FTPOutput Set Values  Alarm Output Function/Set ValueOutput Output ValueRecording files Setting the Advance screenRecording time Start up the VN-C205U Setup Tool and select FTP Server Other Settings Using the VN-C205U Setup Tool 6. WebOther Settings Using the VN-C205U Setup Tool 7. FTP Server Displaying still images uploaded to the /user folderTransfer error PasswordError recovery Connection error Alarm FTP Upload SettingStart up the VN-C205U Setup Tool and select Memory Info Start up the VN-C205U Setup Tool and select TimeWhen NTP is used Connect to VN-C205 NormalHigh Speed Features that Allow Setting Using the V.Networks Controller Starting Up V.Networks ControllerMotion Detection Standby Settings Setting Using the V.Networks ControllerSelect View Specify Image Size and Upside Down settings Image Size and InversionFrame Rate Image Quality SettingOperations Setting Using the V.Networks Controller Alarm Setting When alteration is complete, click Select Setting and Time Stamp Perform settingSelect Setting and Property Perform setting Time StampRecord/Stop Play button Operations Operation Using the V.Networks ControllerPlayback Click Playback screen is displayedSnapshot Access Authorization Level Operating EnvironmentStarting Up the Web Browser Setting Using the Web BrowserOperations Operating Using a Web Browser Setting Using the Web Browser 1. Other Settings Setting Using the Web Browser 2. View Setting  Alarm Setting Using the Web Browser 3. Alarm SettingClick to apply settings and to save the set values  Alarm OutSetting Using the Web Browser 4. FTP Setting Operations Setting Using the Web BrowserViewing Still Images Viewing Live ImagesImage Link TroubleshootingSymptom Causes/Remedial Actions Displaying a still imageSpecifications OthersTemplate テンプレート 120