JVC VN-C205 manual Motion Detection Standby, Image Size and Inversion

Settings (Step 3 Setting Using the V.Networks Controller)

3-3 Motion Detection Standby

The "Motion Detection Standby" function enables automatic connection upon receiving notifications on detected motion from VN-C205 when the V.Networks Controller has been started up.

1.Select [File] and [Motion Detection Standby].

2.Select a camera.

1 Select the camera for which the Motion Detection Standby function is to be enabled.

1 Click .

3.Click .

3-4 Image Size and Inversion

The "V.Networks Controller" can be used to set the size of the motion image window as well as to invert an image.

1.Select [View].

2.Specify [Image Size] and [Upside Down] settings.

Notes

● Setting to the Fine mode enables display of image details.

Images of moving objects shot in this mode may be blurred, but this is not a malfunction.

● Fine mode can only be used with the 640 x 480 resolution.

Click .

Notes

Right-click on the motion image window to change the settings.

Set the image size.

• VN-C205 does not support the 160 x 120 setting.

Displays the MAC address, IP address, model and firmware version.

When is checked, a grid for the motion detection area will appear and the detection area will be displayed in red.

58 59