Vertical Communications FXS, and FXT manual Volume Control Setting Current Volume Level

Other Advanced Features GCA70-349

Volume Control

Setting Current Volume Level

The volume control on your telephone is a multipurpose control you can use to set the volume (loudness) of the ringer, the speaker, the handset, the headset, background music, and the group listening mode.

•There are four ringer loudness levels

(plus an off position). Set these levels as follows:

1. While your telephone is on-hook and idle, PRESS the VOLUME UP OR VOLUME DOWN button once for each change in loudness you desire. The ringer sounds once for each change as an example of the current setting.

Impact SCS 8412S and 8412F

Volume Buttons

NOTE: If you set the ringer to the OFF position, your telephone will sound a short ring burst once for each call you receive at your station while the ringer is off.

•There are eight speaker loudness levels. Set these levels for the current call as follows:

1.While on a call and in speakerphone mode, PRESS the VOLUME UP OR VOLUME DOWN button once for each change in loudness that you desire.

•There are at least eight handset loudness levels that you can set for the current call as follows:

1.While on a call and in handset mode, PRESS the VOLUME UP OR VOLUME DOWN button once for each change in loudness that you desire.

NOTE: When the call ends, the system resets the loudness of all future calls to the programmed (default) setting. For instructions in setting your speakerphone’s default volume, see the next section of this chapter.

78 Large Screen Display Speakerphone Station User’s Guide