Vertical Communications and FXT, FXS manual Select Edit

GCA70-349 Programming

6.SELECT EDIT.

7.Make your speed dial route selection choice from the list on the LCD by pressing the appro- priate button.

•PRESS line button to select outside line,

•DIAL ￿￿to select prime line or last line used.

Select Line

Select Line Group

Select Prime/Last Line

Select Intercom

ARS

EXIT PREV

•	DIAL ￿￿to ￿￿ to select line
	group.
•	PRESS INTERCOM button or dial ￿to se-	Selecting Line or Intercom
	lect intercom.

NOTE: You may need a pause between numbers to compensate for differ- ences in response time between your system and the host system (ask your attendant about this). To store a pause, press HOLD, then continue dialing. If your system is behind a host system that needs a hookflash to access a feature, press TAP to store a hookflash, then continue dialing.

8.DIAL number (up to 16 digits long, include * and # if needed).

9.SELECT DONE to store the number.

10.REPEAT previous steps until all numbers are stored, OR SELECT EXIT.

11.PRESS SPEAKER to end.

0123456789*# Pause (p) Flash (f)

ENTER ERASE DONE

Dialing a Speed Number

Large Screen Display Speakerphone Station User’s Guide 59