Vertical Communications FXS, and FXT manual Response Message Button

Programming GCA70-349

Response Message Button

You may program a RESPONSE MESSAGE button, which allows you to send an LCD message to a caller who has initiated a SOHVA or intercom call from another LCD speakerphone, or to send an LCD message to another LCD speakerphone that you call and receive a busy signal or no answer.

•To store a fixed RESPONSE MESSAGE button (delivers the same message each time it is pressed),

1.SELECT OPTIONS.

2.SELECT Programming.

3.SELECT NEXT until the Feature Button option appears.

4.SELECT Feature Button.

5.SELECT the programmable button you wish to use as a response message button.

6.SELECT NEXT until the Response Message option appears.

7.SELECT Response Message.

8.SELECT from the list of displayed messages. SELECT NEXT to scroll through the list of messages. If you use the Back at or Call options add to them as follows:

•For Back at message, dial the code for the time numbers and colon from dialing codes table.

For example, dial ￿￿￿￿￿￿￿￿￿￿￿

for time 01:45.

•For the Call message, dial the code for telephone number where you can be reached.

For example, dial

￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿for number 978-2200).

9.REPEAT steps 5 through 8 for other features, OR SELECT EXIT to end programming.

66 Large Screen Display Speakerphone Station User’s Guide