Other Advanced Features

GCA70-349

Automatic Redial

If your station has the multiple automatic redial feature enabled, you can place up to ten numbers in your telephone’s redial queue.

NOTE: The AUTOMATIC REDIAL button described in the following steps must be programmed by your system installer or attendant. Individual users DO NOT have access to programming of this feature.

To use the automatic redial feature to redial a busy or unanswered number,

1.While on the call, SELECT Auto Redial OR PRESS the AUTOMATIC REDIAL button programmed by your installer.

2.The system repeatedly dials the number until you cancel the feature or the system has dialed the number a preprogrammed number of times (determined by your system installer).

Wednesday 19 11:36am L123

3.The AUTOMATIC REDIAL light flashes between redials and turns on steady during redialing.

4.IF your installer has enabled answer supervi- sion on your line, the system automatically cancels automatic redialing and turns the AUTOMATIC REDIAL light off.

CONF ARDL

Initiating Auto Redial

5.IF answer supervision is NOT enabled, SELECT Auto Redial OR the programmed AUTOMATIC REDIAL button while on the call to cancel automatic redialing,

6.IF your system installer has enabled the redial multiple numbers feature, you can have up to ten numbers in your redial queue. To add numbers to your redial queue, REPEAT step 1 in the above procedure.

70

Large Screen Display Speakerphone Station User’s Guide

Page 78
Image 78
Vertical Communications FXS, and FXT manual Automatic Redial, Initiating Auto Redial