Setting Volume Levels
The volume control on your telephone is a multipurpose
control you can use to set the volume (loudness) of the
ringer,the speaker, and the handset. There are four ringer
loudness levels (plus an off position).
•To set the ringer loudness level,
1. While your telephone is on-hook and idle,
PRESS the VOLUME UP OR VOLUME DOWN
button once for each change in loudness you
desire. The ringer sounds once for each
change as an example of the current setting.
2. SELECT SAVEto end.
NOTE: If you set the ringer to the OFF position, your telephone sounds a
short ring burst once for each call you receive at your station.
•To set the speaker and handset
loudness levels,
1. PRESS INTERCOM button.
2. PRESS the VOLUME UP OR VOLUME DOWN
button once for each change in speaker
volume that you desire.
3. SELECT SAVE.
4. LIFT handset.
5. PRESS the VOLUME UP OR VOLUME DOWN
button once for each change in handset
volume that you desire.
6. SELECT SAVE.
NOTE: When a call ends, the system resets the speaker and handset volume
of all future calls to the programmed setting. For instructions in setting your
speakerphone’sdefault volume, see Volume Control section in the system
specific Other Advanced Features chapter on page 78.
LargeScreen Display Speakerphone Station User’s Guide 5
GettingStarted GCA70-349
RingerVolume
()
PREV NEXTEXIT
SAVE