Chapter 4: Management with WebPAM PROe
Notes
• Obtain the initiator name from the initiator utility on your host system.
•The initiator name you input must match exactly in order for the connection to work.
•For iSCSI models, if iSNS is enabled, you can copy and paste the Initiator Name. Click on the iSCSI Management icon, then click on the iSNS tab dropdown menu and select Get Initiators. When the initiators display, highlight and copy the one you want and paste it into the Initiator Name field.
LUN Mapping Parameters
•Initiator Name – For iSCSI, the initiator name is the iSCSI name of the initiator device and is composed of a single text string. iSCSI WWNs are somewhat different from regular WWNs.
For Fibre Channel, the initiator name is the World Wide Port Name of the device and is composed of a series of eight,
•Alias – Optional. A common name for an iSCSI initiator
•Symbolic Name – Optional. A common name for a Fibre Channel initiator
•IP Address – IP address of the iSCSI port for this initiator
•Port ID – Port ID of the Fibre Channel port for this initiator
•LUN – Logical Unit Number on this logical drive for the selected initiator. You must enter different LUN numbers for each logical drive.
Logical Drive LUN Settings: SCSI
For SCSI, LUN Mapping is the process of applying a LUN Map so that each port can access the logical drive (target).
You must enable a Target before you assign a LUN to it. See page 95.
To specify a SCSI LUN Map:
1.Click the Subsystem 
icon in Tree View.
2.Click on the Disk Arrays 
icon.
3.Click on the Disk Array 
icon.
4.Click on the Logical Drives 
icon
5.Click on the Logical Drive 
icon.
6.Click the LUN Map tab in Management View.
149
