VTrak M-Class Product Manual
46
• Logical Drives – The ID number of the logical drive(s), their RAID level,
capacity, and stripe size
• Spare Drives – The physical drive ID number of the dedicated hot spare
assigned to this disk array
If you accept these parameters, click the Submit button. The new disk array
appears in the Disk Array List on the Information tab.
If you do NOT accept these parameters, use the Express (below) or Advanced
(page 48) option to create your disk array.
Express
The Disk Array Express Creation option enables you to choose the parameters
for a new disk array by specifying the characteris tics y ou w an t. W ith th is m eth od,
you can create multiple logical drives at the same time you create your disk array.
However, all of the logical drives will be the same size and RAID level.
If you prefer to specify the parameters directly , use the Advance d option to c reate
your disk array.
If you are uncertain about choosing parameters for your disk array, use the
Automatic option.