Promise Technology M300i Battery and fan LEDs VTrak M300f/i/p and M200f/i/p, Dark Green Amber Red

VTrak M-Class Product Manual

Battery LED Fan 1 LED Fan 2 LED

Figure 8. Battery and fan LEDs VTrak M300f/i/p and M200f/i/p

Under normal conditions, the power supply, battery, and fan LEDs should display green. Note that on the VTrak M-Class, the left cooling unit houses a cache- backup battery but the right unit does not.

LEDs			State
	Dark	Green		Amber	Red
Power supply	Not detected	OK		Fan failed	Failed
Battery	Not detected	OK		Too hot or	Failed
				Low capacity
Fan 1 or 2	Not detected	OK		Wrong speed	Failed

To check a component’s installation, follow the same procedure as replacing the component, except that you reinstall the original component rather than a new one. In most cases, this action fixes a bad connection and allows VTrak to detect the component. If this action does not correct the problem, replace the unit. See page 215 for instructions.

The Controller Location LEDs, on the back of the VTrak subsystem, will flash for one minute.

Status LED Dirty Cache LED

Figure 9. A VTrak Fibre Channel controller

266