Promise Technology M300f, M500i, M500f Fibre Channel Logged-in Devices, Fibre Channel Initiators

Chapter 4: Management with WebPAM PROe

To access this tab:

1.Click the Subsystem icon in Tree View.

2.Click the Administrative Tools icon.

3.Click on the Fibre Channel Management icon.

4.Click the SFP tab in Management View

Fibre Channel Logged-in Devices

The Fibre Channel Management–Logged In Device tab enables you to view information about the logged-in devices on the two Fibre Channel ports, including:

•# – Device number

•WWPN – World Wide Port Name

•Port ID – ID of the device, not the Fibre Channel port

•Symbolic Name – If used

One of the devices in the list for each port will be the port itself. If there is no other device, this notification will appear: There is no logged in device. If a Fibre Channel switch is attached, it will also appear in this list.

To access this tab:

1.Click the Subsystem icon in Tree View.

2.Click the Administrative Tools icon.

3.Click on the Fibre Channel Management icon.

4.Click the Logged In Device tab in Management View

Fibre Channel Initiators

The Fibre Channel Management–Initiator tab enables you to view information about the initiators on the two Fibre Channel ports, including:

•# – Device number

•WWPN – World Wide Port Name

•Port ID – ID of the initiator, not the Fibre Channel port

•Symbolic Name – If used

A Fibre Channel switch will also display as an initiator in the list. If your Host PC's Fibre Channel HBA is connected to the VTrak directly (not though a Fibre Channel switch), the initiator will NOT display in the initiator list.

To access this tab:

1.Click the Subsystem icon in Tree View.

87