Promise Technology M300i, M500i, M500f, M300p, M500p, M300f manual Flash through Tftp, Clear Statistics

VTrak M-Class Product Manual

3.Highlight Message Event Severity Filter and press the spacebar to change severity levels.

4.Press Ctrl-A to save your settings.

To delete a recipient:

1.Highlight the recipient you want to delete and press the spacebar to mark it. The mark is an asterisk (*) to the left of the listing

2.Highlight Delete Marked Entries and press Enter.

Flash through TFTP

Use this function to flash the VTrak’s firmware. See “Firmware Update – CLU” on page 219 for this procedure.

Clear Statistics

This function clears the statistical counts for the RAID controller, Fibre Channel ports, iSCSI ports, physical drives, and logical drives.

1.From the Main Menu, highlight Additional Info and Management and press Enter.

2.Highlight Clear Statistics and press Enter.

3.Press Y to confirm the deletion.

Restore Factory Defaults

This function restores the factory default settings to the firmware and software items you select.

Caution

Use this function with care. Do not restore to default settings for any item unless you are sure this action is needed.

1.From the Main Menu, highlight Additional Info and Management and press Enter.

2.Highlight Restore Factory Defaults and press Enter.

3.Highlight the setting group you want and press the spacebar to toggle between Yes and No.

Yes means this setting will be restored to the default value.

4.Highlight Restore Factory Defaults and press Enter.

5.Press Y to confirm the reset.

212