Promise Technology M300p, M500i, M500f, M500p, M300i, M300f, M200i Fibre Channel Port Settings

VTrak M-Class Product Manual

•Firmware Version

•Number of failed nodes

•Supported Features

•Maximum Frame Size

•Supported Speeds

To access this tab:

1.Click the Subsystem icon in Tree View.

2.Click the Administrative Tools icon.

3.Click on the Fibre Channel Management icon.

4.Click the Node tab in Management View.

Fibre Channel Port

The Fibre Channel Management–Port tab enables you to see the current Data Port settings on the Controller, including:

•State – Online, Offline, Unknown

•Port Identifier – A hexadecimal name for this port

•Topology Attached – Fabric Direct, Fabric Loop, Unknown

•WWNN – World Wide Node Name

•WWPN – World Wide Port Name

•Current Speed – 2 GB or 1 GB

•Link Type – Long-wave laser, short-wave laser or electrical

•Symbolic Name – A text name for this port

•Configured Link Speed

•Configured Topology

•Hard ALPA – Address can be 0 to 254. 255 means this feature is disabled

To access this tab:

1.Click the Subsystem icon in Tree View.

2.Click the Administrative Tools icon.

3.Click on the Fibre Channel Management icon.

4.Click the Port tab in Management View

Fibre Channel Port Settings

The Fibre Channel Management–Port tab enables you to make Data Port settings on the Controller, including:

•Configured Link Speed – 2 GB, 1 GB or Auto (self-setting)

84