Promise Technology M300i Enclosure Management, Enclosure Status, Power Supply Units, Blowers

VTrak M-Class Product Manual

4.Press Ctrl-A to save your settings.

Enclosure Management

Enclosure Management includes information, status, settings and location. To access Enclosure Management:

1.From the Main Menu, highlight Subsystem Management and press Enter.

2.Highlight Enclosure Management and press Enter.

To access FPU VPD information (vital product data on field replaceable units), highlight FPU VPD Information and press Enter.

To access the current status of the power supplies, blowers, temperature or voltage sensors, highlight the item you want and press Enter.

Enclosure Status

Enclosure Management

The current status of the power supplies, blowers, temperature or voltage sensors:

1.From the Main Menu, highlight Subsystem Management and press Enter.

2.Highlight Enclosure Management and press Enter.

3.Highlight power supplies, blowers, temperature or voltage sensors and press Enter.

Power Supply Units

This screen displays the operational and fan status of VTrak’s two power supplies.

•PSU (power supply unit) status – Should show Power On and Functional

•Fan Status – Should show Functional

•Healthy Threshold – Minimum acceptable fan speed

•Current Fan Speed – Should be greater than the Healthy Threshold value

If any status differs from those listed above or the fan speed is below the Healthy Threshold value, there is a fan/power supply malfunction. See “Chapter 6: Maintenance” on page 215.

Blowers

This screen displays the status and speed of VTrak’s blowers. There are two blowers in each cooling unit. 500-series VTraks have two cooling units. 300- and 200-series VTraks have one cooling unit.

•Blower status should be Functional

•Healthy Threshold – Minimum acceptable fan speed

•Current Speed – Should be greater than the Healthy Threshold value

176