Chapter 5: Management with the CLU
2.Highlight Startup Type and press the spacebar to toggle between Automatic and Manual.
3.Highlight the following and press the backspace key to erase the current value, then type the new value:
•HTTP Port – 80 is the default
•Session Time Out – 24 minutes is the default. 1440 minutes = 24 hours
4.Highlight SSL and press the spacebar to toggle between Enabled and Disabled.
5.Highlight HTTPS Port and press the backspace key to erase the current value, then type the new value. 443 is the default.
6.Press
To start, stop or restart the Webserver service, highlight Start, Stop, or Restart and press Enter.
Telnet
1.Highlight Telnet and press Enter.
2.Highlight Startup Type and press the spacebar to toggle between Automatic and Manual.
3.Highlight the following and press the backspace key to erase the current value, then type the new value:
•Port number – 2300 is the default
•Session Time Out – 24 minutes is the default. 1440 minutes = 24 hours
•Maximum number of connections – 4 is the default
4.Press
To start, stop or restart the Telnet service, highlight Start, Stop, or Restart and press Enter.
SNMP
1.Highlight SNMP and press Enter.
2.Highlight Startup Type and press the spacebar to toggle between Automatic and Manual.
3.Highlight the following and press the backspace key to erase the current value, then type the new value:
•Port Number – 161 is the default
•System Name – (optional) Type a system name in this field
•System Location – Type a country name in this field
•System Contact – Type the email address of your system administrator in this field
