Promise Technology M300f, M500i, M500f LUN Mapping Scsi, Create New Initiator, Delete Initiator

VTrak M-Class Product Manual

LUN Mapping must be enabled in order for VTrak to recognize the initiator. If LUN Mapping is currently disabled, highlight Enable LUN Mapping and press Enter.

Create New Initiator

1.Highlight Create New Initiator and press Enter.

2.Type the name of the initiator.

Obtain the initiator name from the initiator utility on your host system. The initiator name must match exactly the initiator’s name setting from the host side in order for the connection to work.

A Fibre Channel initiator name is the World Wide Port Name of the device and is composed of a series of eight, two-digit hexadecimal numbers, separated by a dash (-).

An iSCSI initiator name is the iSCSI name of the initiator device and is composed of a single text string.

3.Press Ctrl-A to save the initiator.

Note

LUN Mapping must be enabled in order for VTrak to recognize the initiator.

Delete Initiator

1.Highlight the initiator you want to delete and press the spacebar to mark it. The mark is an asterisk (*) to the left of the listing.

2.Highlight Delete Marked Initiators and press Enter.

3.Press Y to confirm the deletion.

Map a LUN to an Initiator

1.Highlight an existing Initiator and press Enter. A list of logical drives displays.

2.In the LUN field, press the backspace key to erase the current value, then type the LUN you want to assign to this initiator, from 0 to 255.

If you make a error, press Ctrl-R to restore the current LUN.

3.Press Ctrl-A to save the LUN map.

LUN Mapping (SCSI)

This function enables you to assign a Target and LUN to each logical drive, so the SCSI initiator can recognize it.

204