Jensen MP8610BT Final Installation, Final ISO-DIN Installation, Remove Radio from Dash

Installation

Final Installation

1.Connect wiring adapter to existing wiring harness.

2.Connect antenna lead.

3.Slide radio chassis into half-sleeve.

4.Secure radio to bracket using nut (if possible).

5.Replace any items you removed from the dashboard.

Final ISO-DIN Installation

Install the unit using the screw holes on the sides of the unit.

1.Remove trim ring.

2.Mount factory brackets on new radio using existing screws from old radio.

3.Slide radio chassis into dash opening and secure.

4.Reinstall dash panel.

NOTE: The mounting box, outer trim rin, and half-sleeve are not used for this type of installation.

Remove Radio from Dash

To remove the radio from the dash, detach the front panel and remove the trim ring by gently pulling up in the middle to release the plastic snaps. Insert removal keys between the radio chassis and sleeve to depress locking springs. Pull the radio out of the dash.

MP8610BT

Final Installation
Instalación Finale	4
Installation Finale	5

1

PTM 2

3

Final ISO-DIN Installation

Instalación Finale ISO-DIN

Installation Finale 3

ISO-DIN

MOSFET 72

PTM 2

1

4

Remove Radio from Dashl

Extracción del Radio del Automóvil

Retrait de la radio du tableau de bord

10