RADIO MODE
Setting the sensitivity of station seek tuning
You can choose whether the system should only tune into stations with a strong reception or whether it can also tune into those with a weak reception.
➮Press the TUNER button < in ra- dio mode.
The radio functions menu appears in the display.
➮Press the NEXT button 3.
➮Press the softkey 4 assigned to the “SENS” display item.
➮Press the softkey 4 assigned to the “FM” display item (if you want to set the FM search sensitivity) or the “AM” display item (if you want to set the AM search sensitivity).
The display shows the currently set val- ue for the search sensitivity. “SENS 6” is the highest search sensitivity setting and means the tuner can receive dis- tant stations. “SENS 1” is the lowest setting.
➮Move the joystick 7 up/right or down/left to adjust the search sen- sitivity.
➮Press the joystick OK 7 or the MENU button 8 to close the menu.
The settings are saved.
Storing stations (only in static radio mode)
Storing stations manually
➮Select the required FM memory bank, i.e. FM1, FM2, FM3, FMT, or one of the MW, LW or SW wave- bands.
➮Tune into the required station as described in the section entitled “Tuning into a station”.
➮Press one of the six softkeys for longer than two seconds to store the station on that softkey.
Storing stations automatically (Travelstore - only in static radio mode)
You can automatically store the six sta- tions with the strongest reception in the region (only FM). The stations are stored in the FMT memory bank.
Note:
●Any stations that were previously stored in this memory bank are de- leted in the process.
Starting the Travelstore function
➮Press the TUNER button < in ra- dio mode.
The radio functions menu appears in the display.
➮Press the softkey 4 assigned to the “TS” display item.
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS DANSK
65