AKG Acoustics PS 4000 W manual Specifications, RA 4000 B/W Omnidirectional Booster Antenna

Page 19

PS 4000 W Antenna Splitter

7 Specifications

 

 

 

 

 

 

 

 

 

 

Type:

2 x 1 to 4 receivers + 2 x 1 PS (for daisy-chaining)

Carrier range:

500 to 865 MHz

Attenuation:

0, 2, 4, 6, 8, 10, 12, 14 dB switchable

RF inputs:

2 x BNC sockets, 50 ohms

RF outputs:

10 x BNC sockets, 50 ohms

Power requirement:

12 VDC

Size:

200 x 190 x 44 mm (7.8 x 7.5 x 1.7 in.)

Weight:

approx. 970 g (2.2 lbs.)

AB 4000 Antenna Amplifier

 

 

 

Carrier range:

500 to 865 MHz

Gain:

approx. 17 dB to 7 dB, selectable

RF input:

1 x BNC, 50 ohms

RF output:

1 x BNC, 50 ohms

Power requirement:

8 VDC, supplied through connecting cable from PS 4000 W or ASU 4000

Size:

110 x 35 mm (4.3 x 1.4 in.)

Weight:

approx. 150 g (5.3 oz.)

RA 4000 B/W Omnidirectional Booster Antenna

 

 

 

Carrier range:

500 to 865 MHz

Antenna gain + booster gain:

17 dB

RF input:

1 x BNC socket, 50 ohms

RF output:

1 x BNC socket, 50 ohms

Power requirement:

8 VDC, supplied through connecting cable from PS 4000 W or ASU 4000

Size:

78 x 50 x 50 mm / 3.1 x 2 x 2 in.

Weight:

68 g (2.4 oz.)

SRA 2 B/W Active Directional Antenna

 

 

 

Carrier range:

500 to 865 MHz

Antenna gain + booster gain:

21.5 dB

Coverage angle:

70 °

 

 

Size:

230 x 240 x 26 mm (9 x 9.5 x 1 in.)

Weight:

approx. 250 g (8.8 oz.)

ASU 4000 Remote Power Adapter

 

 

 

Carrier range:

500 to 865 MHz

RF input:

1 x BNC socket, 50 ohms

RF output:

1 x BNC socket, 50 ohms

Power requirement:

12 VDC

Size:

78 x 50 x 50 mm / 3.1 x 2 x 2 in.

Weight:

approx. 167 g (5.9 oz.)

This product conforms to the standards listed in the Declaration of Conformity. To order a free copy of the Declaration of Conformity, visit http://www.akg.com or contact sales@akg.com.

PS 4000 W

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Prima di utilizzare l’apparecchio, leggere il manuale Please read the manual before using the equipmentFavor leia este manual antes de usar o equipamento Sicherheit und Umwelt InhaltsverzeichnisBeschreibung SRA 2 B/W 2 RA 4000 B/W AnmerkungSiehe Tabelle 1 auf Seite Inbetriebnahme Siehe Fig Wichtig Antennen anschließenAntenne RG58 0 13 m / RG213 5 26 m 13 m / RG213 5 26 mBringen Sie die Abdeckung wieder an Dies nicht gewährleistetCLA-Schalter Der Kabellänge ab100 110 RG213111 121 100 105 115Reinigung BetriebshinweiseFehlerbehebung Kabellängen zu niedrig Lungs diagrammeTechnische Daten Splitter leuchtet aufTable of Contents PS 4000 W antenna splitter Safety and EnvironmentDescription Introduction Packing ListEd receivers Error LED be lit insteadSupply voltage for active components Disconnect an antenna cableGetting Started Connect an antenna cable to each antenna StandsFloor Boom because this may degrade the reception qualityRefer to on Remove the cover of the CLA switch bankReplace the cover Multichannel Systems with PS 4000 W Antenna Splitters14 dB 12 dB 10 dB Troubleshooting CleaningOperating Notes RA 4000 B/W Omnidirectional Booster Antenna SpecificationsSécurité et environnement Table des matièresConsidéré Nous vous remercions d’avoir choisi un produit AKGSplitter d’antenne PS 4000 W DC/≥1,4 a pour 2 récepteursFace arrière du PS 4000 W Face arrièreMinima suivantes Mise en serviceVoir Fig Che de l’autre splitterBranchez un câble d’antenne sur chaque antenne Installation monocanal avec antennes passivesInstallations multicanaux avec splitter d’antenne PS 4000 W Voir Tableau 1, page 26 et FigÉgalement alimenter trois composants actifs RespondantsPSU 4000 pour trois splitters et quatre récepteurs Via le câble d’antenneGamme I + SRA 2 B/W Nettoyage Instructions pour le fonctionnementAntenne amplifiée omnidirectionnelle RA 4000 B/W Caractéristiques techniquesSponde alla tensione di rete del luogo d’impiego IndiceSicurezza ed ambiente ’apparecchio deve venir impiegato solo in vani asciuttiNota Vo LED OK si spegne e il LED rosso Error si accendeDescrizione Pannello frontaleVamente un alimentatore a distanza ASU SRA 2 B/W Lato posterioreAlimentatore centrale PSU Montaggio su parete/soffitto Messa in esercizio2Montaggio su supporto da pavimento Inserite in ogni antenna un cavo d’antenna Antenna RG58 0 13 m / RG213 5 26 m46 m / RG213 12 97 m Vedi tabella 1 a pagina 35 e figTogliete la copertura dell’interruttore CLA No questo passaggioRimontate la copertura Gamma I + SRA 2 B/W Indicazioni per l’esercizio Errori e rimediPulizia Antenna onnidirezionale con booster RA 4000 B/W Splitter d’antenna PS 4000 WCorriente pueden dañar seriamente el aparato Seguridad y medio ambienteCio de atención al cliente Descripción Parte posterior del PS 4000 W Parte posteriorPuesta en funcionamiento 5Sistemas multicanal con divisor de antenas PS 4000 W Antena RG58 0 13 m / RG213 5 26 mVer Fig ¡Importante Sistema monocanal con antenas activasVuelva a colocar la tapa Otros fabricantes no garantizan estoConmutador CLA El tipo de antena, el tipo de cable y la longitud de cableGama I + SRA 2 B/W Limpieza Solución de erroresLa tensión de alimentación de los componentes de Datos técnicosEmite luz Cable son muy grandesSegurança ÍndiceAlimentador remoto ASU ApresentaçãoMK PS 60 cm Antena direcional passiva SRA 2 W2 RA 4000 B/W Lado traseiroOperação Veja fig Importante Veja tabela 1 na página 53 e figSistema monocanal com antenas ativas Isto não é garantido Bandas I + SRA 2 B/W Dicas para a operação Resolver problemasLimpeza Especificações PS 4000 W PS 4000 W RA 4000 B/W PS 4000 W 4x SR RA 4000 B/ W PS 4000 W/1 PS 4000 W/2 PS 4000 W/3 PSUOut ZAPD-21ASU 01/10/9100 U 12
Top Page Image Contents