Precor M9.55 owner manual Hardware Kit, Acquiring the Appropriate Tools, Diagram

Diagram 2 Hardware Kit.

A

C

E

F

DG

B

Carefully unpack the pieces of the treadmill and lay them on the floor near the location where you plan to use the treadmill.

Hardware Kit

After unpacking the treadmill, open the hardware kit (refer to Diagram 2) and make sure that you have the following items:

(A) twenty — 1” long buttonhead screws

(B) fourteen — flat washers

(C) four — 3/4” long flat head screws

(D) four — flat washers

(E) 1/4” hex key — belt adjustment

(F) 3/16” hex key — mount uprights, display and handrails to base frame

(G) 5/32” hex key — install handrails to display and hood to base

If any items are missing, contact Customer Support at 1-800-347-4404.

Note: After assembling the treadmill, be sure to store the hex keys in a secure place. The tools are used for specific maintenance procedures that are described in this manual.

Acquiring the Appropriate Tools

Obtain the following tools before assembling the treadmill.

Wire cutter

Bubble level

Medium weight string [about 1 foot (30 cm)]

Strong adhesive tape

SAE Standard socket set with a ratchet or 8” Crescent wrench

page 10